AUDIO TS
Bass, Treble, Balance and Fade
Press Mute/AUDIO for more than l/2 second to access Bass. Subsequent presses access Treble, Balance and Fade modes.
Bass
Treble - Adjust from +7 to
Balance - Adjust balance from 9 (all the way left) using + to
Fader - Adjust fader from 9 (sound only from the front) using + to
Loudness (LD)
Press LD to increase sound of low and high frequencies. LOUD icon appears. To cancel, press LD again.
Radio Operation
Last Station Memory
Each FM bank and AM band has its own last station memory which holds
Selecting Bands ’
Press SRC as needed to access FMl, FM2, FM3/FMT, AM/AMT banks.
Seek Tuning
Press A or V to seek next receivable frequency. Tuning stops at frequency that fulfills sensitivity requirements predetermined by sensitivity set through SENS/LD button.
Tuning Sensitivity (SENS)
Press SENS/LD for more that 2seconds to switch between local (lo) and distant search sensitivity.
Radio Reception Hints
•When listening to weak or distant AM stations, adjusting the Treble to minimum
•In general, set SENS to in the distant mode ( so that “lo” does not appear) if in rural areas or where stations tend to be weak and distant, and to lo when in metropolitan areas or where stations tend to be strong and local.
Stereo Symbol
Stereo symbol turns on if a stereo station with an incoming signal of at least 20 dBpV is received. The unit gradually switches between mono to stereo automatically.
Manual Tuning
Press A or V for more than l/2 second and frequency will go one channel/step in direction pressed. Press and hold causes continuous manual tuning. Unit returns to seek tuning mode after 4 seconds or after storing a station on a preset.
14