.
Preset Station Storage
After tuning desired frequency on desired band, press and hold a Preset Button for more than 2 seconds to store current frequency. Audio is muted during storage, preset number appears, and beep acknowledges storage.
Preset Station Selection
Press desired Preset Button.
Travelstore
This feature allows you to automatically store stations onto all 5 preset buttons and is especially useful when traveling outside your normal listening area. In any FM Bank, press SCA/TS for 2 seconds to activate FM Travelstore. (In AM Bank, press it for 2 seconds to activate AM Travelstore.) TS appears. Beginning at the bottom of the band, TS stores five relatively strong stations, one on each of the five preset buttons, and returns to preset 1. Pressing any tuning- related button during Travelstore process cancels search operation!
Station Scan Tuning
Press SCA. Frequency blinks (along with preset number if appropriate) during scanning. Unit stops at receivable stations for 4 seconds. Unit continuously scans until user stops scan by pressing SCA, another tuning button or SRC.
Cassette Tape Player Operation
Tape Playback:
•Insert cassette into Cassette Door. (Note: Make sure that the side of the cassette exposed is facing right and that all slack has been removed from the tape prior to insertion.)
•If ignition switch is already in “on” or accessory position, insertion of cassette will turn unit on. If unit already turned on, cassette insertion will override other audio source, such as radio. “LOAD” appears for 2 seconds. Cassette play will begin, and the display will indicate which tape program is in use, “1” or“2”.
•The tape will continue to play until ejected, SRC button pressed, or unit turned off.
Ejecting The Tape
Press the eject button completely towards the face of the unit. The tape will eject. If uit is turned on, EJ will appear in the display for 2 seconds and the
Tape Program Change
•Automatic Change (Autoreverse): When the end of the tape is reached, the unit will automatically reverse direction and play the other side of the tape.
•Manual Change: To manually reverse tape direction, press both PROG (program) Buttons (FR & FF) at the same time.
•The change in direction and in tape program will be confirmed in the display (“1”or “2”).
Fast Winding
•To
•To
•To stop
Radio Monitor
During tape winding, the radio will play the
Dolby B Noise Reduction
Press Dolby button when playing tapes recorded with the Dolby B noise reduction system to eliminate hissing noise. The Dolby symbol appears in the display. To cancel, press again. Note: Dolby on/off not active in
Dolby noise reduction manufactured under license from Dolby Laboratories licensing Corporation. “Dolby” and the
15