Blaupunkt C31 manual Saving a Station Automatically Travelstore, Going to a Preset Station

Saving a Station

Saving a Station Manually

➮Choose between memory levels FM1, FM2, FMT or the AM wave- band.

➮Tune to the station you want.

➮Choose one of the station buttons 1-5>on which you want to store the station, and hold it pressed for longer than one second.

Saving a Station Automatically (Travelstore)

You can also save the five strongest sta- tions in the area automatically. This is done in the FMT or AM memory level, depending on your chosen waveband.

Note:

●Any stations previously saved on this level will be deleted.

➮Briefly press the TS button 3.

Storing starts. “T-STORE” appears in the display. When the procedure is com- plete, the station in memory location 1 of the memory level in question is played.

Going to a Preset Station

➮Select the memory level where the station is stored.

➮Press the corresponding button 1-5

>.

RADIO OPERATION

Scanning through Available

Stations (SCAN)	ENGLISH
You can listen to short samples from all
the stations that can currently be re-
ceived. The length of the samples can	FRANÇAIS
be set, in the menu, to between 5 and
30 seconds.
Starting SCAN
➮ Hold down the SCAN button 4.	ESPAÑOL
The scanning process starts. “SCAN”
appears briefly in the display, after which
the current frequency is displayed, flash-
ing.	PORTUGUÊS
Stop SCAN, continue listening to a
station
➮ Press the SCAN button 4again.
The scanning process is stopped, and
the last set station remains active.

Setting Scan Time

➮Press the MENU button =.

➮ Press the or button <until “SCANTIME” appears in the dis- play.

➮Set the desired sampling time with

the buttons <.

When the setting process is complete,

➮press the MENU button =.

Note:

●The chosen sampling time also ap- plies to CD-changer scans.

11