Daewoo SD-9800P More Functions, Clock / counter display, Remaining time and cassette length

More Functions

■The counter counts in real time from the point you load the cassette. This does not have to be its beginning! The counter does not count unrecorded parts of the tape.

■If you rewind beyond the zero position, the counter counts in negative values (e.g. – 0:01:15).

Clock / counter display

Each time you press [DISPLAY] button,

Press 1x: Time and date+current status Time and date

Press 2x: Counter+current status counter

Press 3x: disappear.

But if you press [CLK/CNT] button, the display window will change to clock or counter depending upon selection made.

• If you don’t wind tape (PLAY, FF, REW,...), the tape remain time doesn’t appear.

STOP SP	PR01 ARD
	STEREO ON

14:00 08/06 V E180 00:48

• If using a broadcast signal for timer recording, press the button to display the VPS/PDC icon.

Remaining time and cassette length

TAPE CONTROL

TAPE REMAIN

GO TO ZERO

COUNTER RESET

INDEX+

INDEX-

PR+/-:SELECT

OK:CONFIRM SETUP:END

TAPE REMAIN

E-180

E-240

E-300

PR+/-:SELECT

OK:CONFIRM SETUP:END

E-240 01:27

Call the player’s “SETUP”, choose “TAPE CONTROL”.

•Remaining time display is only possible when the cassette is loaded.

When you want the player to show the time remaining from the current player tape position (to find out if there is sufficient space for a recording, for example).

To ensure the remaining time shown is accurate, select the length of cassette currently loaded by selecting the function and specifying the correct length.

Accessing counter zero position

The player will wind to the position 0:00:00 and stop.

REW SP GO TO ZERO

0:02:13

Resetting the counter to zero

COUNTER RESET

Reset the counter.

0:00:00

30