Daewoo SD-9800P, SD-9500P, SD-3500P Initial Installation, Setting up the player, OK for Auto SET

Initial Installation

■Switch the TV on.

■You can also start "AUTO SET" in the SETUP "PR PRESET" "AUTO SET".

■To tune in new stations (manual tuning) and enter station names see page 25-26.

Setting up the player

1	You should see this picture the first time you switch on the TV
	and player.

2	OK for "AUTO SET!".
	"AUTO SET" tunes in all the stations you can receive in your
	country and sorts them in an order common for your country.
	Clock is automatically set.
3	If other stations are positioned on near the current RF OUTPUT
	CH, the guide message appears automatically.
	The player recommends the optimal RF OUTPUT CH number
	automatically.
4	Press the [OK] button to confirm the recommended PR.
	Should you wish the stations to have the same numbers as those

used on the TV, follow the instructions in "Sorting programme locations" on page 26.

Otherwise ...

exit the basic installation function and enjoy your player.

AUTO SET

OK:CONFIRM SETUP:END

CH 25

PLEASE WAIT...

	SETUP:END
RF OUTPUT SET
CURRENT	CH 52
RECOMMENDED CH 54
0-9:SELECT(21-69)
OK:CONFIRM	SETUP:END

IMPORTANT!

PLEASE CHANGE THE TV

CH TO 54.

MANUAL SET

PR01 BBC1	PR08 SKYS
PR02 BBC2	PR09 MTVE
PR03 ITV	PR10 P-10
PR04 CHA4	PR11 P-11
PR05 SKY1	PR12 ----
PR06 SKYN	PR13 ----
PR07 SKYM	PR14 ----

PR+/-:SELECT

OK:CONFIRM SETUP:END

•If you don´t see this picture, because you don´t use a SCART cable, search this picture now (CH 52) with the station tuning functions of your TV set (see its user manual).

•	In case of interference problems on CH 52, type in an
	other transmission channel between 21 and 69 using
	the number buttons.

But use the optimum CH number first!

18