English
Information
RGB SELECT modes
One of these 8 modes must be selected in order to display the following signals correctly.
AUTO: Select the suitable mode for the specifications of input signals as listed in the table “Computer input signals supported by this system” on page 27.
Setting the video signal format
Use these operations to set the color systems of composite video signals or Y/C input signals.
Example: Setting the color system to “3.58 NTSC”
On “COLOR SYSTEM” of “SET UP” menu, select “3.58NTSC”.
SET UP
Setting the gray level for the SIDE MASK
Use this procedure to set the gray level for the parts on the screen on which nothing is displayed when the screen is set to the 4:3 size.
Example: Setting “SIDE MASK” to “5”
On “SIDE MASK” of “SET UP” menu, select “5”.
SET UP
Information
DISPLAY OSD settings
ON: The informations on screen size, volume control, etc. will be shown.
OFF: The informations on screen size, volume control, etc. will not be shown.
The DISPLAY button on the remote control will not
English
STILL: To display VESA standard signals. (Use this mode for a still image from a computer.)
MOTION: The video signal (from a scan converter) will be converted to RGB signals to make the picture more easily viewable. (Use this mode for a motion image from a computer.)
WIDE1: When an 852 dot 480 line signal with a horizontal frequency of 31.7kHz is input, the image may be compressed horizontally. To prevent this, set RGB
LANGUAGE BNC INPUT
COLOR SYSTEM
BACK GROUND SIDE MASK S1/S2
DISPLAY OSD OSD ADJUST ALL RESET
SEL. 
ADJ.
:ENGLISH
:COMPONENT
:RGB
:1080I
:AUTO
:COLOR1
:
3.58NTSC 
:GRAY
:3
:OFF
:ON
:TOP LEFT
:OFF
EXIT RETURN
LANGUAGE
BNC INPUT
SIDE MASK
S1/S2
DISPLAY OSD OSD ADJUST ALL RESET
SEL. 
ADJ.
:ENGLISH
:COMPONENT
:RGB
:1080I
:AUTO
:COLOR1
:AUTO
:GRAY
:
5 
:OFF
:ON
:TOP LEFT
:OFF
EXIT RETURN
function either.
Setting the position of the menu
Adjusts the position of the menu when it appears on the screen.
Example: Set the position to “TOP CENTER”
On “OSDADJ.” of “SET UP” menu, select “TOP CENTER”.
SET UP
LANGUAGE
: ENGLISH |
SELECT to WIDE1.
WIDE2: When an 848 dot 480 line signal with a horizontal frequency of 31.0 kHz is input, the image may be compressed horizontally. To prevent this, set RGB SELECT to WIDE2.
WIDE3: When an 1920 dot 1200 line signal with a horizontal frequency of 74.0 kHz is input, the image may be compressed horizontally. To prevent this, set RGB SELECT to WIDE3.
Information
Video signal formats
Different countries use different formats for video signals. Set to the color system used in your current country. AUTO: The color systems are automatically identified and the format is set accordingly.
PAL: This is the standard format used mainly in the United Kingdom and Germany.
SECAM: This is the standard format used mainly in
Information
SIDE MASK settings
This adjusts the brightness of the black (the gray level) for the sides of the screen.
The standard is 0 (black). The level can be adjusted from 0 to 15. The factory setting is 3 (dark gray).
Setting the screen size for S1/S2 video input
If the S-video signal contains screen size information, the
BNC INPUT
DISPLAY OSD
OSD ADJUST
ALL RESET
SEL. 
ADJ.
: | COMPONENT |
: | RGB |
: | 1080I |
: | AUTO |
: | COLOR1 |
: | AUTO |
: | GRAY |
: | 3 |
: | OFF |
: | ON |
: | TOP CENTER |
: | OFF |
EXIT RETURN
Controls
WIDE4: When an 1280 dot 768 line signal with a horizontal frequency of 59.8 kHz or an 1680 dot1050 line signal with a horizontal frequency of 60 kHz is input, the image may be compressed horizontally. To prevent this, set RGB SELECT to WIDE4.
DTV: Set this mode when watching digital broadcasting (480P).
See page 27 for the details of the above settings.
France and Russia.
4.43 NTSC, PAL60: This format is used for videos in |
countries using PAL and SECAM video signals. |
3.58 NTSC: This is the standard format used mainly |
in the United States and Japan. |
Brazil. |
image will be automatically adjusted to fit the screen when this S1/S2 is set to AUTO.
This feature is available only when an
Example: Setting “S1/S2” to “AUTO”
On “S1/S2” of “SET UP” menu, select “AUTO”.
SET UP
Information
OSD ADJUST settings
TOP | TOP | TOP |
LEFT | CENTER | RIGHT |
|
|
|
|
|
|
BTM | BTM | BTM |
LEFT | CENTER | RIGHT |
Controls
OSD (On Screen Display)
Setting the black level for HDMI signal
Set the black level for the signal transmitted via the HDMI terminal.
Example: Setting “COLOR2”
On “HDMI SET UP” of “SET UP” menu, select “COLOR2”.
SET UP
Argentina. |
Setting the background color when no signal is being input
The color displayed on the background when there is no signal can be set to gray.
Example: Setting “BACK GROUND” to “BLACK”
On “BACK GROUND” of “SET UP” menu, select
LANGUAGE
BNC INPUT
S1/S2
DISPLAY OSD OSD ADJUST ALL RESET
SEL. 
ADJ.
:ENGLISH
:COMPONENT
:RGB
:1080I
:AUTO
:COLOR1
:AUTO
:GRAY
:3
:AUTO
:ON
:TOP LEFT
:OFF
EXIT RETURN
Resetting to the default values
Use these operations to restore all the settings (PICTURE, SOUND, SCREEN, SET UP, etc) to the factory default values.
Refer to page 13 for items to be reset.
On “ALL RESET” of “SET UP” menu, select “ON”, then
OSD (On Screen Display)
LANGUAGE BNC INPUT
: | ENGLISH |
: | COMPONENT |
: | RGB |
: | 1080I |
“BLACK”.
SET UP
Information
press the MENU/SET button.
LANGUAGE | SET UP | ALL RESET |
: | ENGLISH |
RGB SELECT HDMI SET UP COLOR SYSTEM BACK GROUND SIDE MASK S1/S2
DISPLAY OSD OSD ADJUST ALL RESET
SEL. 
ADJ.
: | AUTO |
: | COLOR2 |
: | AUTO |
: | GRAY |
: | 3 |
: | OFF |
: | ON |
: | TOP LEFT |
: | OFF |
EXIT RETURN
LANGUAGE
BNC INPUT
BACK GROUND
SIDE MASK S1/S2
DISPLAY OSD OSD ADJUST ALL RESET
:ENGLISH
:COMPONENT
:RGB
:1080I
:AUTO
:COLOR1
:AUTO
:
BLACK 
:3
:OFF
:ON
:TOP LEFT
:OFF
AUTO: Adjusts the screen size automatically according to the S1/S2 video signal.
OFF: Turns the S1/S2 function off.
Turning on/off the information display
When this is set to OFF, the information will not be displayed even if you press the DISPLAY button.
BNC INPUT | : COMPONENT |
| ||
: RGB | SETTING NOW | |||
HD SELECT | : 1080I | |||
| ||||
RGB SELECT | : AUTO |
| ||
HDMI SET UP | : COLOR1 |
| ||
COLOR SYSTEM | : AUTO |
| ||
BACK GROUND | : GRAY |
| ||
SIDE MASK | : 3 |
| ||
S1/S2 |
| : OFF |
| |
DISPLAY OSD | : ON |
| ||
OSD ADJUST | : TOP LEFT |
| ||
ALL RESET | : ON |
| ||
SEL. | ADJ. | EXIT RETURN |
| |
When the “SETTING NOW” screen disappears, then all the
Information
SEL. 
ADJ.
EXIT RETURN
Example: Turning the DISPLAY OSD off
settings are restored to the default values.
HDMI SET UP settings
COLOR1: When connected to the SET TOP BOX,
Information
On “DISPLAY OSD” of “SET UP” menu, select “OFF”.
SET UP
20
DVD etc. Change “COLOR1” into “COLOR2” if the black level appears gray.
COLOR2: Darker black level (real black).
BLACK: Sets the background color to black.
GRAY: Sets the background color to gray.
Setting this makes it easier to see that there is no signal.
LANGUAGE
BNC INPUT
DISPLAY OSD
OSD ADJUST ALL RESET 
SEL. 
ADJ.
:ENGLISH
:COMPONENT
:RGB
:1080I
:AUTO
:COLOR1
:AUTO
:GRAY
:3
:OFF
:
OFF 
:TOP LEFT
:OFF
EXIT RETURN
21
En | En |