Basic Operations
English
Part Names and Function
Remote Control
qPOWER ON/STANDBY Switches the power on/standby.
(This does not operate when STANDBY/ON indicator of the main unit is off.)
wOFF TIMER
Activates the off timer for the unit.
eDISPLAY
Displays the source settings on the screen.
rSCREEN SIZE
Automatically detects the signal and sets the aspect ratio.
SCREEN SIZE button is not active for all signals.
tMENU/SET
Press this button to access the OSD controls.
Press this button during the display of the main menu to go to the sub menu.
yCURSOR (▲ / ▼ / / )
Use these buttons to select items or settings and to adjust settings or switch the display patterns.
iMUTING Mutes the sound.
oVOLUME
Adjusts the sound volume.
!0ZOOM
Enlarges or reduces the image.
!1SINGLE
Cancels the split screen mode.
!2SIDE BY SIDE
Press this button to show a couple of pictures in the
!3P IN P
Press this button to show a couple of pictures in the
!4ACTIVE SELECT
Press this button to make the desired picture activate during split screen mode.
When the PICTURE FREEZE function is operating, this button can be used to display still images on the subscreen.
!5VIDEO1, 2, 3
Press these buttons to select the input directly. These inputs can also be selected using the INPUT button on the monitor.
!6COMPONENT1
Press this button to select the input directly.
This input can also be selected using the INPUT button on the monitor.
!7PC2/COMPONENT2
Press this button to select the input directly.
This input can also be selected using the INPUT button on the monitor.
!8HDMI
Press this button to select the input directly.
This input can also be selected using the INPUT button on the monitor.
See page 30 for the details of Supported Signals.
!9PICTURE MEMORY
Switches sequentially between picture memory settings 1 to 6.
@0PC1
Press this button to select the input directly.
This input can also be selected using the INPUT button on the monitor.
@1Remote control signal transmitter
Transmits the remote control signals.
POWER
To turn the unit ON and OFF:
1.Plug the power cord into an active AC power outlet.
2.Press the Power button (on the unit).
The monitor’s STANDBY/ON indicator turns red and the standby mode is set.
3.Press the POWER ON button (on the remote control) to turn on the unit.
The monitor’s STANDBY/ON indicator will light up (green) when the unit is on.
4.Press the POWER STANDBY button (on the remote control) or the Power button (on the unit) to turn off the unit.
The monitor’s STANDBY/ON indicator turns red and the standby mode is set (only when turning off the unit with the remote control).
VOLUME
To adjust the sound volume:
1.Press and hold the VOLUME 
button (on the remote control or the unit) to increase to the desired level.
2.Press and hold the VOLUME 
button (on the remote control or the unit) to decrease to the desired level.
MUTING
To mute the sound:
Press the MUTING button on the remote control to mute the sound press again to restore.
DISPLAY
To check the settings:
1.The screen changes each time the DISPLAY button is pressed.
2.If the button is not pressed for approximately three seconds, the menu turns off.
DIGITAL ZOOM
Digital zoom specifies the picture position and enlarges the picture.
1. (Be sure ZOOM NAV is off)
Press the ZOOM (+ or 
)
To change the size of the picture:
Press the ZOOM+ button and enlarge the picture. A press of the ZOOM- button will reduce the picture and return it to its original size.
To change the picture position:
Select the position with the ▲▼ buttons. 2. Press the EXIT button to delete the pointer.
OFF TIMER
To set the off timer: | English |
90 or 120 minutes. | |
The off timer can be set to turn the power off after 30, 60, |
|
1.Press the OFF TIMER button to start the timer at 30 minutes.
2.Press the OFF TIMER button to the desired time.
3.The timer starts when the menu turns off.
→ 30 → 60 → 90 → 120 → 0
OFF TIMER 30
To check the remaining time:
1.Once the off timer has been set, press the OFF TIMER button once.
2.The remaining time is displayed, then turns off after a few seconds.
3.When five minutes remain the remaining time appears until it reaches zero.
OFF TIMER 28
To cancel the off timer: | Operations | ||
| |||
1. | Press the OFF TIMER button twice in a row. | Basic | |
2. | The off timer is canceled. | ||
| |||
OFF TIMER 0
Note:
After the power is turned off with the off timer ...
A slight current is still supplied to the monitor. When you are leaving the room or do not plan to use the system for a long period of time, turn off the power of the monitor.
6
uEXIT
Press this button to exit the OSD controls in the main menu. Press this button during the display of the sub menu to return to the previous menu.
7
En | En |