Front of Your TV, Plug in the TV, Turn on the TV

Connections & Setup

The Front of Your TV

Front Inputs

The TV has front inputs for convenience: one set of audio/video inputs, an S-Video and a headphone jack. Locate the jacks either on the front of the TV or on one of the sides. You can access the component you connected to the front of the TV by pressing the INPUT button on your remote until FRNT appears on the screen. The jacks are ideal for using a video game console or a camcorder.

Note: When connecting a device that uses a monaural cable, such as some camcorders, use the Left (mono) input jack to get sound from both speakers.

PHONES Allows you to connect headphones to listen to the sound coming from the TV. To adjust volume control of the headphones, press the VOL > or VOL < button (the volume display appears). Press the arrow up or down button (the headphone volume display appears), then press the right or left arrow button to adjust the headphone volume.

VIDEO (in) Receives video from another component such as a VCR, camcorder or video game console.

L/MONO and R AUDIO Receives audio from another component such as a VCR, camcorder or video game console.

S-VIDEO (in) Allows you to connect an S-Video cable from another component. Make sure you also connect audio cables from the component to the TV.

Front Panel Buttons

If you cannot locate your remote, you can use the front panel buttons of your TV to operate many of the TV’s features.

MENU/OK Brings up the Main menu. In the menu system, it selects highlighted items.

CH v Scans down through the current channel list. In the menu system, acts like down arrow button on the remote control and adjusts menu controls.

CH v	Scans up through the channel list. In the menu system, acts like up arrow button on the remote control and adjusts menu

controls.

VOL < Decreases the volume. In the menu system, acts like left arrow button on the remote control and adjusts menu controls.

VOL > Increases the volume. In the menu system, acts like right arrow button on the remote control and adjusts menu controls.

POWER Turns the TV on and off.

Plug in the TV

Plug the end of the power cord into a grounded wall outlet. Insert the plug completely into the outlet.

VCR1 ONOFF TV

Put batteries in the remote

•Remove the battery compartment cover from the back of the remote by pushing down on and sliding off the cover.

•Insert 2 “AA” fresh batteries. Make sure the polarities (+ and -) are aligned correctly.

•Replace the cover.

How to Use the Remote Control to Complete the Initial Setup

The technical term is “Navigation” – how you move through the on-screen menus. The theory is the same throughout the menu screens: highlight your choice and select it.

DVD VCR2 AUX

MUTE

CH +

CH -

GUIDE

DISC MENU

SAT CABLE		To highlight a menu item, press the arrow buttons on the remote to highlight one of the items
SAT CABLE
SKIP	TV button	listed on the screen. Use the up or down arrow button to move up or down. Use the right or left
	TV button	arrow button to move right or left.

To select the item that you’ve highlighted, press OK.

	V	Note: Highlighted means that the menu item stands out from other menu items on the list (appears darker, brighter,
	O
	L
	L
		or a different color).
	GO BACK	Turn on the TV
	INFO	Turn on the TV

ZOOM		ZOOM+
-	OK
	OK
	F R E EZE

Arrows

Tip

To access the setup menus manually, press MENU and choose SETUP.

Press TV on the remote, or press POWER on the TV’s front panel.

Note: Pressing the TV button not only turns on the TV, but puts the remote into TV mode. “TV mode” means that the buttons on the remote control operate the TV’s functions.

Complete the Initial Setup

The menu system in your TV allows the TV’s features to work properly. The first time you turn on your TV, the setup screens appear.

Chapter 1

Graphics contained within this publication are for representation only.

Downloaded from www.Manualslib.com manuals search engine