OSD Menu Operations
Adjust the OSD Screen
Picture Settings
:Return 
:Move
When Picture Mode is set to User, the following settings can be manually adjusted. Press PMODE shortcut button on the remote control to select picture mode directly.
Picture Mode
Highlight the item and Press◄/►to select. Movie/Dynamic/Standard/User
Dynamic | Produces a highly defined image in a bright lit room. |
Standard | Produces a highly defined image in a normally lit room. |
Mild | Produces a highly defined image in gentle lit room. |
User | Select to customize picture setting. |
Highlight the item and press ►, and a process bar appears, then press ◄/►to adjust the value. Tint is available when analog TV or
Brightness
Adjust darkness of black sections in the picture.
Contrast
Adjust the white level of the picture.
Color
Adjust the color intensity of the picture.
Tint
Adjust the hue(Red,Green,Blue) of the picture.
Sharpness
Object edges are enhanced for picture detail.
17
OSD Menu Operations
Adjust the OSD Screen
PC Settings
: Move
PC Settings Menu is aviliable only in PC DB15 or DVI mode. When DVI signal input, only Horizontal Position and Vertical Position can be adjusted.
Press ▼/▲ to highlight one of the following options, then press ENTER to select it.
Auto Adjust
Automatically adjust Clock, Phase,
In order to get a good result, you should open a“filling the screen”picture before executing Auto Adjust.
Horizontal Position
Shift the screen slightly to left or right .
Vertical Position
Shift the screen slightly up or down.
Clock
Adjust the DB15 picture signal sampling clock rate.
Phase
Adjust the DB15 picture signal sampling phase. It maybe affect the definition . Wrong value maybe result the interference.
Reset
Reset the parameters of current menu to default value.
18