RCA scenium manual How to Connect TV + Component with DVI or HDMI, Viewing the Component, Chapter

Connections & Setup

TV

FIXED/VARIABLE AUDIO OUTPUTS
CENTER SPEAKER INPUT CENTER R REAR	L REAR
EXTERNAL AMP		MATRIX
MAX POWER RATING!		SURROUND
(60 WATTS into 8 OHMS)		OUTPUTS
				AUDIO/VIDEO
				OUTPUT
SUBWOOFER R	L	WIRED	R	L	V
		IR
POWER
(AC 120V~60Hz)
DIGITAL
AUDIO		CableCARD™
ETHERNET OUTPUT

	COMPOSITE INPUTS					COMPONENT/COMPOSITE INPUTS
						Use menu for composite video.
	INPUT 3						INPUT 4
R	L	V	S-VIDEO		R	L	PR	PB	Y/VIDEO
R	L	V	S-VIDEO		R	L	PR	PB	Y/VIDEO
		INPUT 1					INPUT 2
		CABLE					ANTENNA INPUT
		INPUT		For Factory Use Only

HDMI/DVI INPUT

Use menu for DVI audio.

1B

2

Component with DVI

R	L
Audio Out	DVI Out

1A

OR

Component with HDMI

RL

HDMI Out

Audio Out

How to Connect: TV + Component with DVI or HDMI

High-Definition Multimedia Interface (HDMI) is an uncompressed digital interface that carries both video and audio data by way of an integrated mini-plug cable. Since HDMI is based on Digital Visual Interface (DVI), the jack on the back of your TV is compatible with DVI components.

1.To connect your TV to a component with a DVI jack, use an HDMI cable and an HDMI/DVI adapter.

A.Connect the HDMI cable to the HDMI/DVI INPUT jack on the back of the TV. Attach the HDMI/DVI adapter to the end of the HDMI cable, then connect the adapter to the DVI Out jack on the back of the component.

B.Since you’re using an HDMI/DVI adapter, you need to connect Audio left and right cables to the R and L jacks on the back of the component and to R and L Audio jacks that aren’t in use on the back of the TV.

C.Go to the DVI Audio Input option in the Audio Connections menu to select which Audio Input you’re using.

2.To connect your TV to a component with an HDMI jack, use an HDMI cable.

Connect the HDMI cable to the HDMI/DVI INPUT jack on the back of the TV and to the HDMI Out jack on the back of the component.

Viewing the Component

1.Turn on the TV and the component you want to view.

2.Press the TV button on the remote control.

3.Repeatedly press the INPUT button on the remote control until the HDMI/DVI Video Input Channel is selected.

Note: You can set up the TV to automatically tune to the correct Video Input Channel. This is called Auto Tuning. (See Chapter 3 for more information.)

18 Chapter 1