RCA scenium Plug in the TV, Put Batteries in the Remote, Turn on the TV, MENU button, Chapter

Connections & Setup

Plug in the TV

Plug the flat end of the power cable into the power jack on the back of the TV. Then plug the other end of the power cord into an appropriate wall outlet. Be sure to insert the plug completely. Do not plug into an outlet controlled by a light switch.

Note: When you first plug your TV into an outlet, the Power indicator on the front panel will light and blink for approximately 30 seconds and then go off during the initialization of the TV. The TV can only be turned on after the Power indicator goes off. This happens every time the TV is unplugged and plugged back in.

Tip

When remote batteries are low, the component button(s) corresponding to the mode you’re in flashes when you press a button. Also, a message might appear on the TV screen and disappear within a few seconds. Press CLEAR and replace the batteries to remove the message.

		ON-OFF
learning
	TV	TV
DVD		button
		VCR
SAT/CAB	AUX	AUDIO
PIP	SWAP CH. CTRL FREEZE

CCPRESETS FAV LIGHT

CC

FORMAT INFO

i

CLEAR	MENU	MENU button
C	M

OK button Arrow buttons

SOUNDSKIP

Tip

To access the setup menus, press MENU and choose Assisted Setup.

Put Batteries in the Remote

•Remove the battery compartment cover from the back of the remote by pushing down on the tab and lifting cover.

•Insert 2 fresh “AA” batteries. Make sure the polarities (+ and -) are aligned correctly with the polarities inside the remote.

•Replace the cover.

Turn on the TV

Press TV on the remote, or press the Power button on the TV’s front panel.

Note: Pressing the TV button turns on the TV and puts the remote into TV mode. “TV mode” means that the buttons on the remote control operate the TV’s functions.

Use the Remote Control to Complete the Assisted Setup

The technical term is “Navigation” – how you move through the on-screen menus. The method is the same throughout the menu screens: highlight your choice and select it.

To highlight a menu item, put the remote into TV mode by pressing the TV button then MENU. Press the arrow buttons on the remote to highlight one of the items listed in the menu. Use the up or down arrow button to move up or down. Use the right or left arrow button to move right or left.

To select the item that you’ve highlighted, press OK.

Note: Highlighted means that the menu item stands out from other menu items on the list (appears darker, brighter, or a different color).

Chapter 1 23