RCA L32WD12 manual Complete the Initial Setup, Set the Menu Language, Complete Channel Setup

Set the Menu Language

The first part of the setup allows you to select your preferred language for the menu system.

If English is your preferred language, press OK. To choose another language, press the down arrow button until that language is highlighted, and press OK.

Channel setup

Complete Channel Setup

Make sure you've connected the TV to cable and/or an off-air signal before you start the next part of the setup.

Set the Signal Source

1.A. Did you connect a signal to both ANTENNA/CABLE ANALOG and DIGITAL INPUTS on the back of your TV? If not, go to step 1B. If so, press the down arrow button to highlight Ana. signal type and go to step 2.

B.Did you connect a signal to only the ANTENNA/CABLE ANALOG INPUT? If not, go to step 1C. If so press the right arrow button to select Analog and then press the down arrow button to highlight Ana. signal type. Go to step 2.

C.Did you connect a signal to only the ANTENNA/CABLE

DIGITAL INPUT? If not, go to step 3. If so, press the right arrow button to select Digital and then press the down arrow button to highlight Dig. signal type. Go to step 3.

Set the Analog Signal Type

2.A. Did you connect cable to the ANTENNA/CABLE ANALOG INPUT? If not, go to step 2B. If so, leave the option set to Cable and then press the down arrow button to highlight Dig. signal type. Go to step 3.

B. Did you connect an antenna to the ANTENNA/CABLE ANALOG INPUT? If not, go to step 3. If so, press the right arrow button to highlight Antenna and then press the down arrow button to highlight Dig. signal type. Go to step 3.

Channel setup

Set the Digital Signal Type

3.If you connected a signal to the ANTENNA/CABLE DIGITAL INPUT, leave the option set to Autodetection. The signal type is chosen for you and changes on-screen according to that type once a signal is detected. Press the down arrow button to highlight Auto Ch. search. Go to step 4.

1665105B.indb 14

2/17/06 6:31:45 PM