RCA L26HD31S warranty Connecting a Component with Composite Video Good, Composite Video Connection

Connecting a Component with Composite Video (Good)

To connect a component with a video output jack, such as a DVD player, follow these steps: Example: DVD Player

1.Connect your cable and/or off-air antenna as described on page 12.

2.Connect the video cable to the (VID1) VIDEO jack on the back of the TV and to the video output jack on the DVD player.

3.Connect the red and white audio cables to the (VID1) right and left audio jacks on the back of the TV and to the audio output jacks on the DVD player.

Composite Video Connection

This is an example of a connection using the composite video jack.

Don’t forget:

If necessary, connect antenna or cable to get a picture. Go to page 12 for instructions.

Red

White

Yellow

COMPOSITE CABLES ARE COLOR

CODED—YELLOW=VIDEO;

RED=RIGHT AUDIO; WHITE=LEFT AUDIO

Connecting a Component with Component Video (Better)

To connect a component that has Y Pb Pr jacks, such as a DVD player, follow these steps: Example: DVD Player

1.Connect your cable and/or off-air antenna as described on page 12.

2.Connect three video cables or special Y Pb Pr cables to the COMPONENT INPUT 1 (CMPT) Y Pb Pr jacks on the back of the TV and to the Y Pb Pr outputs on the DVD player.

3.Connect your red and white audio cables to the COMPONENT INPUT (CMPT) R and L AUDIO jacks on the back of the TV and to the audio output jacks on the DVD player.

Component Video Connection

This is an example of a connection using the component video jacks.

AUDIO

R L

Y Video 1

Pb L

Pr R

Optical

Antenna/Cabl

14Chapter 1 Connections and Setup

Green

Red

Blue

COMPONENT VIDEO CABLES

(Y PB PR) ARE COLOR CODED— GREEN, BLUE AND RED

Red

White

AUDIO CABLES ARE COLOR CODED—RED=RIGHT AUDIO, WHITE=LEFT AUDIO