Connections and Setup
Explanation of Jacks
This section describes the jacks and cables you might use to make connections. There are several ways to connect devices to your TV.
Back Panel (right)
VGA Connect your computer to this jack using a 15 pin
VGA AUDIO (Stereo mini jack) Use to obtain sound when a PC is connected to the VGA jack. Use a 3.5 mm stereo mini pin cable (sometimes referred to as 1/8” stereo mini pin) to connect a PC to your TV. Go to page 8 for more information.
CMPT (Component) INPUT
•Y Pb/Cb Pr/Cr For connection of devices that have component output jacks (Y Pb Pr), such as an HD receiver, or DVD player. The TV’s Component jacks can recognize if the device you’re connecting to is Y Pb Pr compatible or Y Cb Cr compatible.
The Y Pb/Cb Pr/Cr jacks provide excellent picture quality because the video is separated into three separate parts.
•AUDIO L and R Use the left and right audio jacks when connecting to the Component video inputs. The right connector is usually red; the left connector is usually white.
Composite Input 1
•AUDIO R and L Use the AUDIO1 right and left audio jacks when connecting to the VID1 input jack. The right connector is usually red; the left connector is usually white.
•VID1 Provides composite video connection. The video connector is usually yellow.
If a device you’re connecting to your TV (like a DVD player) has an
Note: Remember to connect the left and right audio cables to the AUDIO1 In jacks because the
Composite Input 2
AUDIO R and L Use the AUDIO2 right and left audio jacks when connecting to the VID2 input jack. The right connector is usually red; the left connector is usually white.
VID2 Provides an additional composite video connection. The video connector is usually yellow.
ANT Lets you connect a coaxial cable to receive the signal from the antenna, cable, or cable box.
Back Panel (left)
AUDIO/VIDEO OUTPUT Connect a VCR to record programs. You must leave the TV on the same channel you are recording.
•VID OUT Provides composite video connection and connector is usually yellow.
•AUDIO L and R Use the Audio left and right audio jacks when connecting to the VID OUT jack. The right connector is usually red; the left connector is usually white.
Note: When recording from this output, remember to tune to the channel you want to record.
10 | Chapter 1 |