Pelco IV SE SERIES manual Specifications, General, ELECTRICAL Dome Drive Only

Specifications

GENERAL

Construction
Back Box	Plastic
Dome Drive	Aluminum, thermoplastic
Lower Dome	Acrylic
Cable Entry (Back Box)	0.75-inch conduit fitting
Pan Movement	360° continuous pan rotation
Vertical Tilt	Unobstructed +2° to -92°
Manual Pan/Tilt Speeds*
Pan	0.1°- 80°/sec manual operation,
	150°/sec turbo
Tilt	0.1°- 40°/sec manual operation
Preset Speeds
Pan	400°/sec
Tilt	200°/sec
Environment	Indoor only
Operating Temperature	32° to 122°F (0° to 50°C)
Weight (approximate)
Back Box	0.7 lb (0.32 kg)
Dome Drive	3.3 lb (1.48 kg)
Lower Dome	0.4 lb (0.18 kg)

ELECTRICAL (Dome Drive Only)

Input Voltage	18-32 VAC; 24 VAC nominal
	22-27 VDC; 24 VDC nominal
Input Power
24 VAC	23 VA nominal (indoor, without heater)
24 VDC	0.7 A nominal (indoor, without heater)
Fuse	1.25 A
Auxiliary Outputs	2 (Spectra IV SE only)
Alarm Inputs	7 (Spectra IV SE only)
Relay Contacts	AUX 1		AUX 2 Output
Type	Form C		Open collector
			transistor output
Voltage	Low voltage (<40 V)		32 VDC maximum
Current	2 A maximum		150 mA maximum
		7.6 (19.3)
			1.6
			(4.0)
8.7
(22.0)

5.9 (15.0)

NOTE: VALUES IN PARENTHESES ARE CENTIMETERS; ALL OTHERS ARE INCHES.

*For variable-speed operation an appropriate controller is required. With fixed-speed controllers, pan/tilt speed is 20°/sec. The CM6700/CM6800 controller with the KBD200A keyboard has programmable fixed speeds.

The materials used in the manufacture of this document and its components are compliant to the requirements of Directive 2002/95/EC.

This equipment contains electrical or electronic components that must be recycled properly to comply with Directive 2002/96/EC of the European Union regarding the disposal of waste electrical and electronic equipment (WEEE). Contact your local dealer for procedures for recycling this equipment.

14 C3416M-B (11/06)