Tripp Lite owner manual Omnismart HG, Specifications, Approvals UL, cUL, NOM

1111 W. 35th Street

Chicago, IL 60609 USA

Customer Support: (773) 869-1234

www.tripplite.com

Owner’s Manual Addendum to #93-1422

OMNISMART™ HG

Line-Interactive UPS Systems with Hospital-Grade Plug and Receptacles (120V)

The OmniSmart HG UPS systems described in this addendum have the same features and controls as the OmniSmart and OmniPro UPS systems described in the accompanying owner’s manual with the exception of the information listed below.

Hospital Grade Plug & Receptacles: OmniSmart HG UPS systems comply with UL 1778 standards. These UPS systems feature high-impact resistant thermoplastic hospital- grade plugs and receptacles. The superior quality of the plugs’blades and higher retention force of the receptacles are designed to reduce the risk of accidental disconnection.

Warning: Tripp Lite does not recommend the use of any of its UPS Systems in any life support applications in which a malfunction or failure of a Tripp Lite UPS System could cause failure or significantly alter the performance of a life-support device.

Specifications

	OmniSmart 450 HG	OmniSmart 1400 HG
Output Capacity (VA/Watts):	450/280	1400/940
Battery Runtime
(Half Load/Full Load) Minutes:	17/5	24/8
Battery Recharge Time:	2-4 hrs.	2-4 hrs.
Approvals:	UL, cUL, NOM	UL, cUL, NOM

ALL MODELS: Input Voltage/Frequency (120V/60Hz); On-Line Input Voltage Range (75-147 volts); Voltage-Regulated Output Voltage Range (120V+6%/-12%);On Battery Output Voltage Range (120V [+]5%); Output Waveform Line Mode (filtered sine wave); Output Waveform Battery Mode (PWM sine wave); AC Surge Suppression (exceeds IEEE 587 Cat. A & B standards); AC Noise Attenuation (>40 dB); AC Protection Mode (H to N).

Tripp Lite has a policy of continuous improvement. Specifications are subject to change without notice.

Copyright ©2003 Tripp Lite. All rights reserved.