Chapter 3: Using USB Clone Tool
Learning - 32inch
Copying settings out of TV.
Rear panel of the set
SERVICE |
| AUDIO IN | ANTENNA/ |
| AV1 | (RGB/DVI) | CABLE IN |
|
|
| |
VIDEO | L AUDIO R |
|
|
Side panel
USB IN | of the set | |
2.5mm Stereo Cable | ||
R | ||
(cross data cable) | - | |
AUDIO | ||
AV2 |
Teaching
USB Cloner
Learning
1.Turn TV on.
2.Connect USB Cloner to TV USB Port.
3.Set switch to “learning” position.
(Status LED will Light red without flashing.)
4.Connect 2.5mm Stereo Cable (cross data cable) between the TV service port and the USB Cloner ser- vice port.
5.Press the Learn button for 1 second. As soon as the LED turns green, release the button.
6.The LED will turn Red and flash while the settings are being saved to the USB Key. Upon successful copy, the LED will light up yellow for 2 seconds and then return to a red, constantly lit state. Upon an unsuccessful copy, the LED will flash an error code as described in the “Error Table” section.
Note : New TV Settings file, “ChList.bin” will appear on the USB Cloner .
Learning - 42inch
Copying settings out of TV.
Rear panel of the set
AUDIO IN | ANTENNA/ | DIGITAL AUDIO |
|
|
|
(RGB/DVI) | CABLE IN | OUT(COAXIAL) | SERVICE | ||
|
|
|
|
|
|
|
|
|
|
|
|
| 2.5mm Stereo |
|
| |
| Cable (cross |
|
| |
Teaching | data cable) | - R |
| |
|
| L - AUDIO |
| |
|
|
| AV2 | |
Learning |
|
| VIDEO |
|
|
|
|
| |
|
|
| USB IN |
|
USB Cloner | Side panel | |||
|
| of the set | ||
1.Turn TV on.
2.Connect USB Cloner to TV USB Port.
3.Set switch to “learning” position.
(Status LED will Light red without flashing.)
4.Connect 2.5mm Stereo Cable (cross data cable) between the TV service port and the USB Cloner ser- vice port.
5.Press the Learn button for 1 second. As soon as the LED turns green, release the button.
6.The LED will turn Red and flash while the settings are being saved to the USB Key. Upon successful copy, the LED will light up yellow for 2 seconds and then return to a red, constantly lit state. Upon an unsuccessful copy, the LED will flash an error code as described in the “Error Table” section.
Note : New TV Settings file, “ChList.bin” will appear on the USB Cloner .
38 | Chapter 3 |