RCA J26L637L manual ClonePRO, Understanding the Menus, Set the Time, Master Menus, Basic Menus

Page 8

Connections and Setup

Set the Time

The current time options might not be available to the basic user, depending on how they've been set by the master user. (The Time Configuration menu isn't available in the basic menu).

To set the time, from the Main menu select Time then Time Config. If the current time has not been set, use the arrow and number buttons on the remote control to make changes.

1.From the Main menu, highlight Time and press OK.

2.Time Config. is highlighted. Press the right arrow to enter the menu.

3.Time is highlighted. To set the time press the right and left arrow button to add or subtract minutes. Use the number buttons to set the hour. The OK button changes am and pm.

The ClonePRO™

If several TVs need to be programmed with the same menu settings, an optional ClonePRO remote can be used to copy all of the menu settings from one TV into other TVs to reduce installation time. Information can be both downloaded to and uploaded from the ClonePRO using the DSCI port on the TV’s back panel or using the IR sensor. A ClonePRO can be obtained from your RCA commercial distributor. Chapter 2 has information about this remote, see page 15. If you want to set other menu options before using the ClonePRO, continue on in this chapter. You can use the ClonePRO at any time.

Understanding the Menus

This television displays two levels of menus: master and basic.

Master Menus

The master menus are accessible by pressing MENU on the master remote (R130K2). This menu shows all menu options. The person who chooses the settings available to the basic end user is called the “master user.”

Basic Menus

The basic menus are accessible by pressing MENU on a basic remote (R130K1 or other remote) or the front panel. The choices available on the basic menus and control panels will vary depending on limits set by the master user and the input selected. You can turn off the basic menu completely through the Access & Power Options menu. For more information on the effects of master user choices on the basic menu and basic user functionality, continue on in this chapter.

Note: Options set in the master menu are stored in nonvolatile memory. If any options are changed in the basic menu, and then the TV is turned off, the TV defaults to the master menu settings once it’s turned back on.

8

Chapter 1

Page 7 Page 9
Image 8
Page 7 Page 9
Contents LCD Television User’s Guide Important Information Product Registration Product InformationImportant Safety Instructions Read before operating equipmentTable of Contents Things to Consider Before You Connect Connections and Setup Get the PictureGetting Digital Channels Getting Regular Analog ChannelsRear Jack Panel Start-upClonePRO Understanding the MenusSet the Time Master MenusSound Menu Using Master and Basic MenusSetting Limits in Master Menus Access and Power Options Menu Changing Channels What To ExpectWatching TV Explanation of Jacks in alphabetical order Front Panel Buttons Right Side Input Jacks when facing back of TVButtons and Other Jacks On Your TV Types of Remote Controls Additional Remote Buttons R130K2Master Remotes Basic RemotesUsing the Remote Control ClonePRO Remote ButtonsBasic Menu System Picture MenuTime Menu Using the Menu SystemParental Control Menu Language & CC Menu Using the TVs Features Channel BannerUsing the TV’s Features Parental Controls and V-ChipHow V-Chip Works for USA and Canada Lock/Unlock Parental ControlsV-Chip Rating Screen US V-Chip TV Ratings Blocking Age-Based RatingsBlocking Specific Content Themes Blocking Canadian V-Chip RatingsChip Movie Rating Limit Blocking Movie RatingsBlock Channels Block Digital ChannelsAdditional Features Lock Time MenuBlocking Unrated/Exempt Programs Future Rating RegionScreen Formats Following formats are only available for analog videoFrequently Asked Questions FAQs Other InformationUsing the ClonePRO Dsci modeOther Information Modes of operationIR Mode IR red ButtonsClonePRO Troubleshooting Cloning a TVTroubleshooting TV ProblemsProblems with HDMI/DVI Connection Remote Control Doesn’t Work Mounting Your TV to the WallCanadian English V-Chip Rating System Chip Rating ExplanationsUS V-Chip Rating System Canadian French V-Chip Rating System Autotuning How to Set Up the Autotuning FeatureLimited Warranty What we will do within one yearCare and Cleaning How state law relates to warrantyFCC Information TTE Technology, Inc
Top Page Image Contents