Using the TV’s Menu System
0Go Back
1Signal Strength
2Channel Search
3Signal Source
4Auto Tuning
5Special Features
Main Menu4Connections
Front Input
Use this screen if you have misplaced your remote control and need a way to tune to a different antenna or to go to the video inputs. Use the arrows to highlight the rectangle 
then press OK or
You can select a source from the available signal sources. Press OK to continue.
Signal Source
The Signal Source menu allows you to choose the source from which you would like the signal to come: Cable Input, Antenna Input, or Video Inputs. The same can be accomplished using the device buttons if you’ve set up Auto Tuning on the remote or by pressing the INPUT button. But, if you misplace the remote, this feature gives you another way to tune to a signal source.
|
| Main Menu4Connections |
|
|
| |
|
| Select which input or channel should be automatically tuned | ||||
0 Go Back |
| |||||
| when a button listed below is pressed on the remote control. | |||||
1 Signal Strength |
| |||||
| VCR | AUDIO (Audio Receiver/Amp) | ||||
|
| |||||
2 Channel Search |
|
| Front Input |
| Not Connected |
|
| VCR2 | RCA SAT2 | ||||
3 Signal Source |
| |||||
|
| Not Connected |
| Not Connected |
| |
4 Auto Tuning |
| DVD |
|
|
| |
5 Special Features |
|
| Input 2 |
|
|
|
| ||||||
|
|
| Not Connected |
|
|
|
Press OK to select the channel or input that is tuned when the VCR key is pressed on the remote.
Auto Tuning
This menu lets you specify the various devices you have connected to your TV. It lets you program a device button on the remote control (VCR, AUX•HD, DVD, SAT•CABLE, or AUDIO) so that pressing the button automatically turns on the TV and turns the TV to the correct Video Input Channel (go to Chapter 3 for detailed information).
Notes: The AUX•HD button by default is set up for an RCA HDTV Tuner receiver.
If you have two RCA satellite receivers, you can control each separately. Program the second receiver with the AUX•HD button using the 5001 code. Then use the RCA SAT2 option in the auto tuning menu to set auto tuning.
Chapter 4 | 57 |