Connections & Setup
0Go Back
1Continue Setup
2Cancel Setup
Main Menu4Assisted Setup
English
Highlight with the 5and 6 arrows. Select with the OK button.
Español
Resalte con las flechas 5 y 6. Seleccione con el botón OK.
Mise en surbrillance avec 5 et 6. Sélection avec OK.
Press 5or 6to point to an option, then press OK to select it. Press 4 to return to the menu.
Set the Menu Language
1.Use arrow buttons to highlight your preferred language for the menu system.
2.Press OK to select that language.
3.Press the left arrow button to highlight Continue Setup and press OK to continue.
0Go Back
1Continue Setup
2Cancel Setup
Main MenuAssisted SetupChannel Search
Input to search: | Channel Search finds channels | |
| Cable Input | for you. Check fewer boxes to |
| Antenna Input | make the search faster (but |
|
| less complete) and vice versa. |
Channels to search: | The first time that you do a | |
| Digital channels | |
| Analog channels | Channel Search, put a check in |
| all the boxes to do a thorough | |
Other search options: | search for channels. | ||
| Detect antenna or cable setting | ||
| Include previously found channels in search | ||
| |||
|
|
| To add a channel that Channel |
|
|
| Search didn't find, clear all |
|
|
| menus and directly tune to the |
| Start |
| |
|
| channel with the number keys. | |
|
|
| |
Pressto make changes to this screen's settings. Press OK to skip to the next step in the setup routine.
Complete Channel Search
Even though this initial channel search can take several minutes, it is important to complete in order for your TV to display channels and programming. Make sure you have connected cable and/or
1.Press the right arrow button to access the channel search screen, then use the up and down arrow buttons to choose an option. Press the OK button to toggle the option on (check mark in box) or off.
Tip
The first Channel Search takes several minutes if the TV is searching for analog and digital channels, and cable and antenna inputs are being searched. You may want to leave and come back later.
What To Expect
Watching TV
To do a channel search, check each box that pertains to your TV. For example, if you’re only receiving cable from the CABLE INPUT, highlight Cable Input and press OK to place a check mark in the box.
Note: If a cable box is connected to your TV’s CABLE INPUT, or the CableCARD slot is in use, don’t check the Cable Input box.
2.Press the down arrow to highlight Start and press OK to begin the setup.
3.When the channel search is complete, a message screen appears. Select Continue. Another message screen appears telling you that you’ve completed the Assisted Setup. Select Continue on the left.
Note: If you skip Channel Search now, you can access it later through the Connections menu. See Chapter 4 for more details.
If you have both analog and digital cable channels these will be put into the same channel list. To tell the difference between these channels, press the INFO button and look in the channel banner for these things: a subchannel, the format, and resolution the TV is receiving.
•Analog channels only display one channel number. Digital channels received through the digital cable card also have one channel. number. Digital channels received through cable have a primary channel and a subchannel. In the example below, 6 is the primary channel; 1 is the subchannel.
•Analog channels are sent in a 4:3 format. Digital channels can be sent in a format of 4:3, but usually 16:9.
•Analog channels are sent in a resolution up to 480i. Digital channels are sent in a resolution of 480i, 480p, 720p, 1080i, or 1080p.
Channel number | Channel format and resolution | ||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
Program Title/Acquiring Channel | 12:30 AM |
| 00:30 | 12:39 PM | |||||||
|
|
|
|
|
|
|
|
|
|
|
|
Ch |
|
| Cable Input | ||||||||
Listening to English in SRS |
| 16:9 Normal 1080i HD | |||||||||
|
|
|
|
|
|
| MPAA - Not Rated |
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
20 | Chapter 1 |