Basic Operations, Turning On/Off the Power

Basic Operations

Insert the power cord into the wall outlet.

Press the STANDBY button on the unit or the ON-OFFbutton on the remote control, the unit will be turned on and you will be

ready to use its features.

With the power on, press the STANDBY button on the unit or the ON-OFFbutton on the remote control to turn off the unit, and

put the unit in standby mode. To cut off the power completely, please disconnect the AC power cord.

Note: If there is no signal input for a certain time, the TV will auto go to standby mode.

Switching Sources

YPbPr

1.Press the SOURCE button on top of the TV or the INPUT button on the remote control and you will see the picture above.

2.Use ▲▼ buttons to select the source you want to switch to and press the OK button in the middle of the ▲▼ buttons.