FEATURES AND MENUS
Advanced Convergence
After you have adjusted the color projection tubes as described previously, you can make finer adjustments to specific areas of the screen using the Advanced Convergence feature described below.
Note: Before you use the advanced convergence feature, you must complete the previous steps to align the tubes.
1.Press the MENU button on the remote.
2.Press 3 to select the Screen option.
3.Press 4 to select the Adjust Projection TV option.
4.Press 4 to select the Advanced Convergence option (the Advanced Convergence screen appears).
The green pattern is fixed. The red and blue patterns are adjusted to the green pattern. The Red Convergence appears first by default.
5.Colored
6.Use the arrow buttons to adjust the red pattern. Each press of the arrow button makes a slight adjustment from the center of the
7.Press the INFO button to switch to Blue convergence and follow the steps above to adjust the blue pattern.
8.Press OK to exit. You will be asked if you want to save the adjustments.
Yes Saves adjustments.
No Returns to the Advanced Convergence screen allowing further adjustments.
Clear Exits screen without making any changes.
CHANNEL MENU
Signal Type Displays a choice list that lets you select the current antenna type. This option does not appear when the GUIDE Plus+ system is set up.
UHF/VHF Antenna Choose this if you are currently using an
Cable TV Choose this if you are currently using cable or a cable box for TV signals.
ADJUST PROJECTION TV
1 Green Centering
2 Blue Convergence
3 Red Convergence
4 Advanced Convergence
0 Exit
ADVANCED RED CONVERGENCE
OK | Exit |
| |
|
|
|
|
CLEAR | Cancel & Exit |
| |
VOL & CH | Move on Grid |
| |
Arrows | Adjust Red to Grid |
| |
INFO | Switch to Blue |
|
MAIN MENU
1 Audio
2 Picture Quality
3Screen
4 Channel
5 Time
CHANNEL
6 Parental Controls
7 GUIDE Plus+ Menu
1 Signal Type
8 Setup
2 Auto Channel Search
0 Exit
3 List and Labels
4 Auto Tuning
0 Exit
33