FEATURES AND MENUS
Auto Channel Search Tells the TV to search automatically for all the channels available through the antenna input. When the TV finds an active channel, it places it in the channel list; inactive channels (weak stations or channels with no signal at all) will be removed from the channel list. If you are using a cable box and have setup your GUIDE Plus+ system, this option will not appear.
List and Labels Displays a control panel that lets you
Channel # Use the up and down arrows to scroll up and down through the channel scan list. You can enter the channel number directly using the number buttons.
Normal List Only the channels included in the Normal list are available when you scan up and down using the CH +/- buttons. Use the up and down arrows to indicate whether the channel number indicated is included (Yes) or is not included (No) in the Normal channel list.
Channel Labels Use the up and down arrows to enter a six- character label for each channel. Hold the button down to scroll quickly through the characters. Press RESET to clear a label. The TV
can store up to 27 labels in memory.
Auto Tuning Displays a choice list that lets you set up the TV to automatically tune to the correct input channel when you press a component button (VCR1, DVD, VCR2, AUX or SAT•CABLE) on the remote.
Set VCR 1 Channel Displays a choice list that lets you select the channel that the TV tunes to when you press the VCR1 button.
Set VCR2 Channel Displays a choice list that lets you select the channel that the TV tunes to when you press the VCR2 button.
Set DVD Channel Displays a choice list that lets you select the channel that the TV tunes to when you press the DVD button.
Set SAT/Cable Channel Displays a choice list that lets you select the channel that the TV tunes to when you press the SAT•CABLE button.
The choices for each screen are:
Not Connected Choose this if you do not have a component connected to an antenna or video input on the back of the TV, or if you don’t want the TV to tune to a channel when the particular component button is pressed.
Channel 2 (SAT/Cable only) Choose this if your component is connected to the antenna jack on the back of the TV, and you want the TV to tune to channel 2 when you press the specified component button. Reminder: Make sure the component’s Ch 2/3/4 switch is set to channel 2.
MAIN MENU
1 Audio
2 Picture Quality
3Screen
4 Channel
5 Time
6 Parental ControlsCHANNEL
7 GUIDE Plus+ Menu
1 Signal Type
8 Setup
2 Auto Channel Search
0 Exit
3 List and Labels
4 Auto Tuning
0 Exit
SET VCR1 CHANNEL
1 Not connected 2 Channel 3
3 Channel 4
4 Video 1 Input
5 Video 2 Input
34