TV Stand Installation
TV LED42B45RQ is packaged with the TV stand separated from the cabinet. To setup the TV table stand, please carry out the installation according to the instructions below.
Step One
Place the TV faced down on a soft cloth or cushion to prevent the panel from being damaged.
The panel can be scratched easily, so please:
1. Choose an absolutely flat surface to place the TV on.
2. Use soft cloth or cushion to face the TV panel. Do not put TV on the table directly.
Always unplug the AC cord first when installing/removing the stand.
Step Two
Insert the neck into the opening on the bottom of the TV, and then insert the 4 screws into the 4 holes on the neck and tighten them.
Pedestal Screws | Quantity | Part # |
|
|
|
M4 x 10mm | 4pcs | RS01TM410H |
|
|
|
Step Three
Take the base. Please align four holes of the base and four screwholes of the neck, insert the base to the neck, and then insert the 4 screws and tighten them.
Pedestal Screws | Quantity | Part # |
|
|
|
M4 x 10mm | 4pcs | RS01TB410H |
|
|
|
9