Other Information
Lamp Replacement Information
Replacing the Lamp Unit
Your TV’s source of light comes from a lamp – similar to lamps used in film or front projectors. Although this lamp is long- lasting, it may need to be replaced eventually.
When to replace the lamp
You probably need a new lamp if there’s no picture, but you still can hear the audio and the power light on the front of the TV does the following: blinks 5 times, pauses, blinks 5 times again. If the TV doesn’t turn on after 5 minutes and then the light blinks steadily for one minute, the lamp may be dead. If you have any concerns, please contact us at
Note: The same symptoms occur if the lamp unit isn’t seated correctly or lamp access door is ajar. If you have recently accessed the lamp, make sure the lamp access door is completely closed and the lamp unit is seated correctly.
What to do
The lamp has been designed to make installation as easy as possible, but if you don’t follow the directions, there is a risk of injury.
•You can easily replace the lamp yourself by following the instructions that come packed with the new lamp. If your TV is still covered by the warranty, call
•If your TV’s warranty has expired, call
This symbol indicates that the lamp in the HDTV contains mercury. Special disposal of the lamp for environmental reasons may be required under the laws applicable to your jurisdiction. For disposal or recycling information, please contact your local authorities or the Electronic Industries Alliance: www.eiae.org or call
Service Model Number Numéro de
HDLP50XXXXXX 000000000 X
SERIAL SERIE | LAMP |
EXAMPLE: Service Model Number sticker with lamp type listed.
What you’ll need to get started:
•To order the correct lamp, you’ll need to know your TV’s model number, serial number, and lamp
•Follow the replacement instructions that come packed with the new lamp.
Service Model Number Sticker location with Lamp Type
54 | Chapter 5 |