Using the Menu System
Adv. Picture Settings
Black Level | 0 IRE. . . |
Backlight Adjust | Normal. . . |
Film Mode |
|
Noise Reduction | Level 1. . . |
Press </> to select. Press MENU to go to Picture Menu.
Sound
Volume
Treble
Bass
Balance
Sound Type | Mono. . . |
Mute
Auto Volume Level
Press </> to adjust. Press MENU to go to Main Menu.
Advanced Picture Settings
Black Level Adjusts the amount of light the picture emits for the darkest areas of an image. Select 0 IRE when the dark colors appear too dark; select 7.5 IRE to enhance the dark contrast in the picture.
Backlight Adjust Press the right arrow button to scroll through the adjustments to the TV screen, depending on room lighting: Soft; Normal; and Bright.
Film Mode (Also known as 3:2 Reverse Pulldown) Detects and converts film content for better display with minimal artifacts. If you’re watching a movie, turn on (box has check mark).
Noise Reduction Reduces the picture “static” or any type of interference. Select None if the signal is clear; Level 1 if the signal has minimal static; Level 2 if the signal has some static; and Level 3 if the signal has a lot of static.
Sound Menu
The Sound menu lets you adjust audio output. To access the Sound menu, press MENU on the remote, and then select Sound from the main menu.
Volume Increases or decreases the volume coming from the TV’s speakers.
Treble Increases or decreases the treble.
Bass Increases or decreases the bass.
Balance Press the right arrow button to increase the audio output in the right speaker; press the left arrow button to increase the audio output in the left speaker.
Sound Type Press the right arrow button to scroll through the available audio types, which control the way the sound comes through your speakers: Mono, Stereo and SAP (Second Audio Program).
Note: Sound Type is not available for VID2 input channel.
Mono plays the sound in mono only. Use this setting when receiving broadcasts with weak stereo signals.
Use Stereo to split the incoming stereo audio signal into left and right channels. Most TV programs and recorded materials have stereo audio.
SAP plays the program’s audio in a second language, if one is available. SAP audio is broadcast in mono. SAP is also used to broadcast a program’s audio with descriptions of the video for the visually impaired.
Note: SAP is not available for input channels.
Mute Press the right arrow button to turn on or off the volume to the TV speakers.
Auto Volume Level Turn on this feature to reduce blasts in volume during commercial breaks to create more consistent audio output.
26 | Graphics contained within this publication are for representation only. | Chapter 4 |