Using the TV’s Menu System
0 Go Back
1 InitialText hereChannel
2 Initial Volume
3 Maximum Volume
4 CableCARD Tools
5 Remote Setup
Main Menu 
Connections 
Special Features
Select what should occur when power is restored to the TV:
Off: Initial Channel is disabled
On: Go to last input or channel selected
On: Go to Cable Input
Channel 999
Note: An Initial Channel setting of "On" will be enabled only when the TV is plugged back in or electricity is otherwise restored to the TV. Initial Channel is not enabled from the turning on of the TV with the remote or front buttons.
Press or to point to an option, then press OK to select it. Press to return to the menu.
Special Features
The special features options are mostly intended for commercial/retail use.
Initial Channel You can select the channel that your TV automatically turns on and tunes to each time power is lost to the TV. This feature only applies if you unplug the TV or when you lose electricity in your home, not when you use the power button on the remote or front panel. Choose a video input or select Antenna or Cable Input and select a channel.
Initial Volume This feature works only if the Initial Channel feature is set to On. Select the volume level that you want when the TV is turned on.
Maximum Volume This feature is intended to stop the volume from being turned up too loudly. Set the volume at the loudest level you would want to hear.
Main Menu 
Connections 
Special Features
0 Go Back
Network Setup
1 Initial Channel | CableCARD™ Status |
CableCARD Tools Displays information available for digital cable TV services when a CableCARD is inserted in the back of the TV and you have subscribed to digital cable service. Go to page 18 for more information on
2 Initial Volume
CableCARD™ Pairing
Conditional Access
3 Maximum Volume
4 CableCARD Tools
5 Remote Setup
Two lines of help text will apear in this area to explain the feature and instruct the user on how to use it.
Example status screen for digital cable television service.
Example status screen for digital cable television service.
Example status screen for digital cable television service.
Example status screen for digital cable television service.
Example status screen for digital cable television service.
Example status screen for Continue
using your CableCARD.
The CableCARD Tools information might vary according to the brand of card you have inserted into your TV. The graphic to the left is an example of what you might see. Select an option to view more information.
Some CableCARD Tools screens might have additional information displayed on more than one page. Use the arrow buttons on the remote to highlight the blue link at the bottom of the page; for example, Continue as the graphic to the left shows, and simply press the OK button on the remote to read more text. If more than one link appears, use the arrow buttons to highlight the one you want. To exit the screen, press CLEAR on the remote.
0 Go Back
1 TextInitialhereChannel
2 Initial Volume
3 Maximum Volume
4 CableCARD Tools
5 Remote Setup
Main Menu 
Connections 
Special Features
Select the remote mode that this TV should respond to: 
TV (default)
TV2
TV3
Use this screen if you want to set up this RCA TV to respond to a different RCA TV remote mode. By doing so, you can independently control two RCA
TVs that are near each other simply by changing the mode of the remote. A third RCA TV can be added to the
same location and controlled separately if it has this screen and is set up to respond to a remote mode that is different than the first two RCA TVs.
Remote Setup can be used to control up to three TV's in the same location. Press OK to continue.
Remote Setup This feature allows you to control three different RCA TVs. This is helpful if you have two or three RCA TVs near each other, and they also have this menu option, but you want to control them independent of each other. Program a second RCA TV to the VCR, DVD, AUX, SAT/CABLE, or AUDIO component button using the TV2 code 1222. Select the TV2 option in that TV’s Remote Setup menu. If you have a third RCA TV, program a component button using the TV3 code 1223. Select the TV3 option in that TV’s Remote Setup menu. Go to Chapter 2 for more information on programming your remote.
58 | Chapter 4 |