Basic operation (to be continued)
4)SKIP
Press q/p Arrow button to select “SKIP”, then press t/u Arrow button to select “On” or “Off”. On: skip the channel; Off: not skip.
5)AFT
Press q/p Arrow button to select “AFT”, then press t/u Arrow button to select “On” or “Off”.
6)FINE TUNE
In case of bad image or sound of TV program, you can use Fine Tune function to obtain satisfied image or sound with operating steps as follows:
Press q/p Arrow button to select “FINE TUNE” and press t/u Arrow button to conduct fine tuning from high frequency to low frequency or from low fre- quency to high frequency till best picture or sound effect is obtained.
Note: Only if “AFT” is set to “OFF”,you can adjust the “FINE TUNE”.
7)AUTO SEARCH
Press q/p Arrow button to select “AUTO SEARCH”, then press u Arrow button to start Auto Search:
AIR | AUTO SEARCH |
CH: 1
TV will tune automatically and all programs found will be saved. Please don’t interrupt it.
Note:
i)If you use the TV for the first time, you must use “AUTO SEARCH” to search and memorize all channels.
ii)If your TV is not in TV input state, you must switch it to TV state at first.
iii)If you want to stop the process of “AUTO SEARCH”, just press MENU button to exit.
16