RCA D44LPW134 manual Connections & Setup, Things to Consider Before You Connect

Page 10

Connections & Setup

Things to Consider Before You Connect

Protect Against Power Surges

Connect all components before you plug any of their power cords into the wall outlet.

Turn off the TV and/or component before you connect or disconnect any cables.

Make sure all antennas and cables are properly grounded. Refer to the Important Safety Instructions on page 1.

Protect Components from Overheating

Don’t block ventilation holes on any of the components. Arrange the components so that air can circulate freely.

Don’t stack components.

If you place components in a stand, make sure you allow adequate ventilation.

If you connect an audio receiver or amplifier, place it on the top shelf so the heated air from it won’t flow around other components.

Position Cables Properly to Avoid Audio Interference

Insert each cable firmly into the designated jack.

If you place components above the TV, route all cables down the side of the back of the TV instead of straight down the middle of the TV.

If your antenna uses 300-ohm twin lead cables, do not coil the cables. Also, keep the twin lead cables away from audio/video cables.

Important Stand and Base Safety Information

Choose the location for your TV carefully. Place the TV on a stand or base that is of adequate size and strength to prevent the TV from being accidentally tipped over, pushed off, or pulled off. This could cause personal injury and/or damage the TV. Refer to the Important Safety Instructions on page 1.

Use Indirect Light

Don’t place the TV where sunlight or room lighting will be directed toward the screen. Use soft or indirect lighting.

8

Chapter 1

Image 10
Contents User’s Guide Important Information Product Registration Product InformationImportant Safety Instructions Part 1 DLP- brilliance, in color, design, and technology Lamp ReplacementThank you for choosing RCA Scenium How DLP WorksIntroduction Part 2 Why RCA Scenium DLP is betterResolution it’s math...that works for you Aspect RatioDVI-HDTV Input Digital Signal and SoundTruScan Digital Reality Virtual Dolby* Surround Pro LogicTable of Contents Table of Contents Connections & Setup Chapter OverviewConnections & Setup Things to Consider Before You ConnectComponents Choose Your ConnectionCables Needed to Connect Components to Your TV Cables Connection Go to Needed TitleExplanation of Jacks Back Panel Jacks in alphabetical orderFront Input Jacks 1A1B VCRTV + Hdtv Tuner + VCR + DVD Player Go to3B 3A SatelliteTV + Satellite Receiver + VCR Make sure cable or antenna is connected to your VCR2B 2A TV + DVD + VCR TV+ A/V Receiver or Speakers Front Panel ButtonsPlug in the TV How to Use the Remote Control toComplete the Initial Setup Put batteries in the remoteComplete Auto Channel Search Welcome Screen and Connection ConfirmationChanging Lists and Labels Using the Remote Control Using the Remote Control Buttons on the Remote ControlTip Find Out If You Need to Program the Remote Using Direct EntryProgramming the Remote to Operate Other Components Programming the RemoteHow to Use the Remote After You’ve Programmed It Using Automatic Code SearchLearning Feature Adding a Learned FunctionUsing the Remote Control Clearing a Learned Function Deleting ALL Learned FunctionsVolume Punchthrough Using the Input Button Deleting All Punchthrough CommandsCable Box Codes Audio CodesHdtv Tuner Codes DVD codesVCR Codes Programmable for VCR and AUX/HD buttonsUsing the TVs Features Channel Banner Autotuning Parental Controls and V-ChipWhy You Should Use the Autotuning Feature Using the TV’s FeaturesAutotuning Channel BannerHow to Set Up the Autotuning Feature How V-Chip Works for USA and Canada Parental Controls and V-ChipUS V-Chip TV Rating Limit USA Description and Content Themes for Age-Based Ratings V-Chip Rating ScreenBlocking Age-Based Ratings Blocking Specific Content ThemesContent Themes Viewing Age-Based RatingsCanada V-Chip Ratings Blocking Canadian V-Chip Ratings Canadian French V-Chip Rating SystemLock/Unlock Parental Controls Chip Movie Rating LimitBlocking Unrated/Exempt Programs Front Panel BlockPicture-outside-Picture Operation PIP Picture-in-Picture and POPPIP and POP Buttons Using the TVs Menu System Using the TV’s Menu System Sound MenuUsing the TV’s Menu System Advanced picture settings Picture MenuDisplay options settings Time Menu Channel Guide MenuParental Control Menu Setup Menu PIP MenuPreferences Other Information Troubleshooting Other InformationNo sound, picture okay TV turns on unexpectedlyBlank screen No picture, sound okayTV picture keeps switching between screen formats abruptly Volume buttons not adjusting volume louderLow battery warning appears on screen Don’t remember my password and I want to unlock the TVLamp Replacement Instructions Replacing the Lamp UnitStep Steps 7Other Information What your warranty covers Limitation of Warranty Accessory Information HOW to OrderIndex DVDNorth Meridian Street Indianapolis, TTE Technology, IncTocom 1642954A