RCA F19421 manual Channel Menu, Time Menu

Chapter 3: Using the TV’s Menu System

Channel

1 Signal Type: CABLE TV

2 Auto Channel Search

3List

0Exit

Time

1Sleep Timer

2Set Time

3Wake-up Timer

0Exit

Channel Menu

Signal Type Displays a toggle that lets you select the current antenna type.

Antenna Choose this if you are currently using an off-air antenna for UHF/VHF TV signals.

Cable TV Choose this if you are currently using cable or a cable box for TV signals.

Auto Channel Search Tells the TV to search automatically for all the channels available through the antenna input. When the TV finds an active channel, it places it in the channel scan list; inactive channels (weak stations or channels with no signal at all) will be removed from the channel list.

List Displays a control panel that lets you edit your channel scan list. Use the CHAN or VOL buttons to move between fields and to enter settings.

Chan # Use the CHAN up and down buttons to scroll up and down through the channels available via your antenna. You can enter the channel number directly using the number buttons.

Scan List Use the CHAN up and down buttons to indicate whether the channel number indicated is included (Yes) or is not included (No) in the channel scan list.

Time Menu

Sleep Timer Displays a control panel that lets you select the amount of time you want to give the TV before it shuts itself off. Use the VOL+ and VOL– buttons to increase or decrease the timer by 30-minute increments.

Set Time Displays a control panel that lets you enter the current time. Use the VOL up and down buttons to set the time.

Wake-up Timer Displays a control panel that lets you set up a schedule for turning the TV on automatically. Use the VOL up and down buttons to set the Wake-up Timer.

20 Graphics contained within this publication are for representation only. Your unit might differ slightly.