RCA D61W17B manual TV + Hdtv Tuner + VCR + DVD Player, Go to

Page 9

Connections & Setup

TV + HDTV Tuner + VCR + DVD Player

1.Make sure cable or antenna and/or satellite is connected to your VCR.

A.Connect the coaxial cable from your cable outlet or antenna to the antenna input on the HDTV Tuner.

B.Connect the satellite dish antenna to the satellite input on the HDTV Tuner.

2.Make the video connection between your HDTV Tuner and the TV.

A.Best Connection: DVI-HDTV

Connect a DVI-HDTV cable to the DVI-HDTV jack on the back of your HDTV Tuner. Connect the other end of the cable to the DVI-HDTV input on the back of TV.

– OR –

B.Very Good Connection: Connect three video grade cables to the CMP1 Y PB PR jacks on the back of the TV and to the Y PB PR jacks on the HDTV Tuner.

Notes: The DVI-HDTV and Y PB PR jacks send the digital cable signal to the TV in digital and analog formats, respectively.

3.Make the audio connection between your HDTV Tuner and the TV (to match your video connection).

A.If you used the DVI-HDTV jack:

Connect the audio (white and red) cables to the DVI-HDTV L and R audio jacks on the back of the TV and to the Audio Output jacks on the HDTV Tuner.

– OR –

B.If you used the Component Video jacks:

Connect the audio (white and red) cables to the CMP1 L and R audio jacks on the back of the TV and to the Audio Output jacks on the HDTV Tuner.

4.Connect your HDTV Tuner to your VCR.

A.Connect a coaxial cable to the HDTV Tuner’s antenna output and to VCR’s antenna input.

B.Connect the audio (white and red) cables to the Audio Output jacks on the HDTV Tuner and to the Audio Input jacks on the VCR.

C.Connect the video cable to the Video Output jack on the HDTV Tuner and to the Video Input jack on the VCR.

5.Connect your VCR to your TV.

A.Connect a coaxial cable to the VCR’s antenna output and to the ANTENNA/CABLE Input jack on the TV.

B.Connect the audio (white and red) cables to the VID2 L/MONO and R audio jacks on the back of the TV and to the Audio Output jacks on the VCR.

C.Connect the video cable to the VID2 V (video) jack on the back of the TV and to the Video Output jack on the VCR.

6.Connect your DVD player to your TV.

A.Connect the audio (white and red) cables to the CMP2 L and R audio jacks on the back of the TV and to the Audio Output jacks on the DVD player.

B.Connect three video grade cables to the CMP2 Y PB PR jacks on the back of the TV and to the Y PB PR jacks on the DVD player.

Notes: If your DVD player doesn’t have Y PB PR jacks, but does have an S-Video jack, connect the player to the TV’s VID1 S-VIDEO jack using an S-Video cable.

If your DVD player doesn’t have an S-Video jack, connect the player to the TV’s VID1 V (video) jack using a video cable.

Important: If you use the TV’s VID1 S-VIDEO or V (video) jack to connect the DVD player, you must connect the audio cables to the TV’s VID1 L/MONO and R jacks.

Go to page 15

Chapter 1

Graphics contained within this publication are for representation only.

7

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Hdtv Monitor User’s Guide Product Registration Product Information Important InformationImportant Safety Instructions Introduction Key Features OverviewTable of Contents Things to Consider Before You Connect Connections & SetupCables Needed to Connect Components to Your TV Choose Your ConnectionComponents Cables Connection Go to Needed TitleHdtv DVD VCR Go to TV + Hdtv Tuner + VCR + DVD PlayerSatellite Make sure cable or antenna is connected to your VCR TV + Satellite Receiver + VCR2B 2A TV + DVD + VCR TV+ A/V Receiver or Speakers Explanation of Jacks in alphabetical order Front Input Jacks Front of Your TVPlug in the TV How to Use the Remote Control to Complete the Initial SetupPut batteries in the remote Front Panel ButtonsTurn on the TV Complete the Initial SetupSet the Menu Language Complete Auto Channel SearchAuto Convergence Changing Lists and LabelsButtons on the Remote Control Using the Remote ControlTip Programming the Remote to Operate Other Components Using Automatic Code SearchFind Out If You Need to Program the Remote Programming the RemoteUsing Direct Entry Using the Input Button How to Use the Remote After You’ve Programmed ItVCR Codes Remote Control CodesAutotuning Using the TV’s FeaturesWhy You Should Use the Autotuning Feature Channel BannerHow to Set Up the Autotuning Feature Parental Controls and V-Chip How V-Chip Works for USA and CanadaUS V-Chip TV Rating Limit V-Chip Rating Screen USA Description and Content Themes for Age-Based RatingsBlocking Specific Content Themes Blocking Age-Based RatingsViewing Age-Based Ratings Canada V-Chip Ratings Canadian French V-Chip Rating System Blocking Canadian V-Chip RatingsBlocking Unrated/Exempt Programs Chip Movie Rating LimitLock/Unlock Parental Controls Front Panel BlockPIP and POP Buttons Sound Menu Using the TV’s Menu SystemPicture Menu Advanced picture settingsUsing the TV’s Menu System Channel Guide Menu Time MenuParental Control Menu PIP Menu Setup MenuShort-term vs. Long-term Power Outages Other Information TroubleshootingRemote Control Doesn’t Work FCC Information Care and CleaningRCA Hdtv Monitor Limited Warranty Limitation of Warranty How State Law relates to warrantyIf you purchased your unit outside the United States HOW to Order Accessory InformationDVD IndexThomson Inc
Top Page Image Contents