Connections
Connecting unit to a TV
If your TV has Audio/Video inputs, you can connect the unit to your TV using Audio/Video cable.
Watching a DVD on your TV
1.Connect your TV to the unit using an Audio/
Video cable.
2.Turn on unit. Slide the DVD/AV IN switch to
DVD.
3.Turn on the TV and follow the instructions included with it to play the DVD.
Note:
• Make sure to use the correct Audio/Video cable. Connecting
the plugs incorrectly may cause a weak signal.
•If your TV does not have Audio/Video inputs, you will need to purchase an RF modulator (sold separately) and follow the instructions included with it to connect the unit to your TV.
Listening to a stereo receiver or amplifier on unit
The unit can play two channels Dolby Digital.
EN
Listening external audio equipment
1.Connect the unit to the left/right Audio In jacks on the other equipment using an Audio/
Video cable.
2.Turn on unit. Slide the DVD/AV IN switch to AV IN.
3.Turn on your audio equipment and follow the instructions provided with it to select the
AUDIO IN function.
Note:
• Make sure to use the correct Audio cable. Connecting the
plugs incorrectly may cause a weak signal.
•If you have a stereo VCR, make sure you set it to stereo mode.
•Due to copyright protection, DVD movies cannot be copied. If you copy a DVD movie onto a videotape, the resulting copy will be unclear, with poor sound quality. This is NOT caused by a defective DVD system.
9