Additional Information
Troubleshooting
The unit does not switch on.
•Make sure it is plugged in.
•Turn on the unit.
EN The device switches off spontaneously.
•The device switches off automatically when it is in STOP mode for more than 30 minutes without any user intervention. Switch it on again.
•It might be impossible to read the disc.
•Insert the disc with the printed side facing up.
•Make sure disc can actually be played by this device.
•Make sure disc’s regional code matches the unit’s regional code. This unit’s regional code is 1.
•Clean the disc.
There is no picture.
•Make sure you have switched on the TV set.
•Check the connections.
•Select the AV input/output assigned to unit on the TV.
The picture is of poor quality (with snow or lines).
• Check the connections.
There is no sound or the sound is of poor quality.
• Check the connections.
I can’t find my file in the JPEG listing.
• Make sure the filename is valid.
The remote control does not work or works only intermittently.
•Make sure batteries are inserted or change them.
•Aim the remote control at the unit. The infrared beam must not be blocked or interrupted.
•Make sure the remote control is configured to control the device you are trying to operate with it.
The subtitles do not appear.
•Make sure the DVD provides subtitles.
•Refer to the section on how to display subtitles.
The disc menu language is not the correct one.
•The disc menu language has not been set up.
•The language of your choice is not available on the disc.
18