DV2011
TUNER OPERATION
Recall a Station
7 | 1 | 6 | 4 | 10 |
|
|
|
|
| 24 |
|
|
| 23 | 2 | 20 |
|
|
|
|
|
|
|
|
|
|
|
|
| DV2011 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| MP3 |
|
|
| MUTE |
|
|
|
|
|
|
|
|
|
|
| WMA |
| ||
|
|
|
| LOUD |
|
|
|
|
|
|
|
|
|
|
|
|
| MODE |
| LOC |
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
| EQ |
|
|
|
|
|
|
|
|
|
|
|
|
| BAND |
|
|
|
| INT | RPT | RDM |
|
|
|
|
|
|
| |
|
|
|
|
|
| 1 | 2 | 3 | 4 | 5 | 6 | A/PS | DISP |
| AV IN |
|
5 | 3 | 19 |
| 8 | 9 | 12 | 13 | 14 | 15 | 16 | 17 | 11 | 18 | 22 |
| 21 |
Select a band (if needed). Press a preset button
Automatically Store / Preset Scan
Automatically Store
Select a band (if needed). Press A/PS (11) for more than three seconds to automatically select six strong stations and store them in the current band. The new stations replace any stations already stored in that band.
Preset Scan
Select a band (if needed). Press A/PS (11) to scan stations stored in the current band. The unit will pause for ten seconds at each preset station. Press A/PS again to stop scanning when the desired station is reached.
Select a Band
Press the BAND button (19) on the control panel (or the SOURCE button on the remote control) to change between three FM bands and two AM bands. Each band stores up to six preset stations.
Tuning
Manual Tuning
Press the up >> (20) or down << button (21) for less than three seconds to enter seek tuning mode. Press the up >> or down << button to change the radio frequency number up or down one step.
If using the remote control, press the TUNE + or TUNE - buttons to change the radio frequency number up or down one step.
Auto Seek Tuning
Press the up >> (20) or down << button (21) for more than three seconds to move to the next station automatically.
Preset Stations
Six numbered preset buttons store and recall stations for each band.
Store a Station
Select a band (if needed), then select a station. Press and hold a preset button
Stereo
The unit will automatically pick up a stereo signal, when available. When in stereo mode, the “
” icon appears in the display. When no stereo signal is available, the unit will automatically revert to mono operation, and no icon will be displayed.
12