RCA RC6001P user manual To Connect the DVD Player

Connections & Setup

DVD Player + TV + Dolby Pro Logic, Dolby Digital or DTS Receiver

To Connect the DVD Player

1.Connect the left and right audio cables to your audio/video receiver and to the 5.1 CHANNEL AUDIO OUT L (left – white) and R (right – red) jacks on the back of your DVD Player.

2.If you have a Dolby Digital or DTS receiver, insert an optical digital cable (not provided) to the DIGITAL AUDIO OUT jack on the DVD player to the Digital Input jack on the back of the receiver. You must also set the Digital Ouput setting in the Sound menu (see chapter 5).

3.Connect the video cable.

•Basic video connection – Connect the video cable (yellow) to the COMPOSITE jack on the back of your DVD Player, and to the Video Input jack on your TV.

OR

•S-Video(optional) – If your TV has an S-Video Input jack, connect the S-Video cable to the S-VIDEO OUT jack on the back of your DVD Player and to the S-Video jack on your TV. If your TV doesn’t have S-Video, use the basic video connection listed above.

OR

•Component video (optional, not shown in illustration) – If your TV has component video (Y, PB, and PR) jacks)use video-grade cables for the Y, PB, and PR connections. Note that it is essential to match the color coded connectors with a compatible TV. If your TV doesn’t have component video, use the basic video connection listed above.

Note: If you use this connection, you must change the Video Output in the Display menu (see page 42). The default video output is S-video/Composite.

4.Connect the AC power cord into an AC outlet.

Go to page 18

Chapter 1 11