RCA RC6001P user manual DVD Player + TV + VCR + Satellite Receiver

Connections & Setup

DVD Player + TV + VCR + Satellite Receiver

1.Connect the audio cables to the 5.1 CHANNEL AUDIO OUT L (left – white) and R (right – red) jacks on the back of your DVD Player, and to the corresponding Audio Input jacks on your TV.

2.Connect the video cable.

•Basic video connection – Connect the video cable (yellow) to the COMPOSITE jack on the back of your DVD Player, and to the Video Input jack on your TV.

OR

•S-Video(optional) – If your TV has an S-Video Input jack, connect the S-Video cable to the S-VIDEO OUT jack on the back of your DVD Player and to the S-Video jack on your TV. If your TV doesn’t have S-Video, use the basic video connection listed above.

OR

•Component video (optional, not shown in illustration) – If your TV has component video (Y, PB, and PR) jacks)use video-grade cables for the Y, PB, and PR connections. Note that it is essential to match the color coded connectors with a compatible TV. If your TV doesn’t have component video, use the basic video connection listed above.

Note: If you use this connection, you must change the Video Output in the Display menu (see page 42). The default video output is S-video/Composite.

3.Use a coaxial cable to connect the antenna output on the satellite receiver to the antenna input on the VCR.

4.Insert the AC power cord into an AC outlet.

Go to page 18

Chapter 1 15