Tape, Disc Options | RCA DRC8300N instruction

RCA DRC8300N manual Tape, Disc Options

Chapter 5: Menu System

Watch TV		Play Disc
Disc		Disc Title Menu

Tape		Player Menu
Disc Library		Playlist
Timers		Disc Options

Setup

To start playback from the beginning, press OK.

Disc Options

AutoPlay: When you select On, a pre-recorded DVD disc immediately starts playing after you insert it into the player (there’s no need to press the PLAY button). With AutoPlay On, recordable discs (DVD+R or DVD+RW) with content recorded on them will automatically display contents.

Note: For CDs with mp3 or JPEG ﬁles on them, instead of playing automatically, the contents of the CD (the ﬁles and/or folders) appear automatically.

Screen format: the setting you choose adjusts the way a movie appears on your TV (DVD discs only). Standard TVs are 4 x 3 format. Depending on the type of television you have, you may want to adjust the screen setting (also called the aspect ratio). The choices follow:

4 x 3 Letterbox – Choose this setting if you want to see movies in their original aspect ratio (height-to-width ratio). You’ll see the entire frame of the movie, but it will take up a smaller portion of the screen vertically. The movie might appear with black bars at the top and bottom of the screen.

4 x 3 Letterbox

4 x 3 Standard

16 x 9

Watch TV Disc

Tape

Disc Library

Timers

Setup

Watch TV Disc

Tape

Disc Library

Timers

Setup

Play Tape

Play From Start

Copy Tape

Rewiew A-B Edits Delete A-B Edits

Tape Options

Tape AutoPlay

Playback Mode

Auto Rewind

4 x 3 Standard – Choose this setting if you want the movie to ﬁll the entire screen of your TV. This might mean that parts of the picture (the left and right edges) won’t be seen. Most discs that are produced in a widescreenonly format can’t be cropped in this fashion.

16 x 9 – Choose this setting if your DVD/VCR is connected to a widescreen TV. If you choose this setting and you don’t have a widescreen TV, the images on the screen might appear distorted due to vertical compression. If you play a disc recorded in 4 x 3 format on a widescreen TV, the left and right sides of the screen will appear black.

Angle Icon: Some DVDs are produced with multiple camera angles. However, it is difﬁcult to know when the angle feature is available throughout a movie. If you turn on the Angle Display, an icon will appear on the screen whenever multiple angles are available for a particular scene in a movie.

Tape

Play Tape: starts playing the tape.

Play from Start: Rewinds the tape to the beginning and starts playback.

Copy Tape: Allows you to copy the contents of a tape to a DVD+R or DVD+RW disc. The copy will begin from the current position on the tape to the end of the tape.

Note: Tapes (movies) that have been encoded with copy-protection cannot be copied to disc.

Review A-B Edits: Allows you to review A-B Edit segments you created using the VCR Info Display (see page 35 for more information). Also allows you to play A-B Edit segments.

Delete A-B Edits: Allows you to delete A-B Edit segments.

Tape Options:

Tape AutoPlay: When you select On, the tape starts playing automatically after you insert it into VCR (there’s no need to press the PLAY button).

Playback Mode: Gives you two options for VCR playback:

Digital – Sends the VCR content through the digital part of the DVD/VCR, which enables you to use the VCR InfoDisplay during playback (for more information, go to page 35).

Analog – Choose Analog if you want to play a tape and view the picture in true analog format without going through the digital encode and decode process, which is applied through the digital path. In the Analog mode, you will not be able to see the on-screen

To start playback from the beginning, press OK.

Info Display described on page 35.

AutoRewind: When you select On, the tape automatically starts rewinding as soon as you reach the end of the tape.

Graphics contained within this publication are for representation only.