Connecting the DSS Receiver
Connection B (Very Good Picture and Sound Quality)
To use this connection you must have:
•TV with separate RF and audio/video inputs (jacks)
•VCR with RF and audio/video inputs
•Coaxial and audio/video cables
To connect TV, VCR and antenna or cable box.
1.Connect coaxial cables as shown.
2.Connect audio/video cables as shown.
To receive DSS programming:
1.Tune TV to receive line output from DSS receiver (often called Input 1).
2.Tune DSS receiver to desired channel.
To receive off-air programming (no cable box):
1.Turn VCR off or press TV/VCR button.
2.Tune TV to desired channel.
To receive off-air programming (with cable box):
1.Turn VCR off or press TV/VCR button.
2.Tune TV to cable box output channel (usually CH2, CH3, or CH4).
3.Tune cable box to desired channel.
To record DSS programming:
1.Tune TV to record line output from DSS receiver (often called Input1).
2.Tune DSS receiver to desired channel.
3.Set your VCR to record on line input.
To view VCR programming:
1.Tune TV to VCR output channel (usually CH3 or CH4).
.
46