Troubleshooting
Troubleshooting
The DSS System Test allows you to run a basic diagnostics check on your DSS system. If you are experiencing any trouble with your system, run the system test.
Make sure that
•All
•There are batteries in the remote, and that they are working correctly.
•The access card is installed in the receiver.
Running the System Test
Follow these steps to run the diagnostics system test on your system.
1.Turn on your TV and the DSS receiver.
2.Press DSS to put remote in DSS mode, then press MENU to bring up the Main menu.
3.Point to Options and press SELECT. The Options menu comes up.
4.Point to Setup and press SELECT. The Setup menu comes up.
5.Point to System Test and press SELECT. The System Test display screen comes up.
6.Point to the Test button and press SELECT. Follow the
7.If your system does not pass the system test, check any of these potential trouble areas: cabling, pointing the satellite dish, phone connection, and access card.
8.If you continue to have problems, call
55