Identifying Controls
Battery case
Fitting the battery ( page 9)
When using for the first time, remove the insulating sheet. | |
( | page 7) |
Infra-red receiver
Receives
The liquid crystal shutter open/close timing is controlled by receiving
Nose pad installation section
(3D Eyewear inner section)
( 
page 7)
Specialized band can be attached
here. ( 
page 7)
Liquid Crystal Shutter (lens)
Controls the images for 3D viewing. The left and right liquid crystal shutters are alternately opened and closed in time with the left side and right side images that are alternately displayed on the television to achieve the 3D effect.
Power button (bottom side of 3D Eyewear)
Switches on the 3D Eyewear power. Press and hold the power button for approximately 1 second to switch the power on, and the power lamp lights for approximately 2 seconds.
To switch the power off, press and hold the power button for approximately 1 second. (The power lamp flashes 3 times, then the power switches off.)
Power lamp
Power button
4