Storage and Cleaning
Clean using a soft, dry cloth.
Wiping the 3D Eyewear with a soft cloth that is covered in dust or dirt may scratch the eyewear. Shake off any dust from the cloth before use.
Do not use benzene, thinner, or wax on the 3D Eyewear, as doing so may cause the paint to peel off.
Do not dunk the 3D Eyewear in liquid such as water when cleaning. Avoid storing the 3D Eyewear in hot or highly humid locations.
Replacing the batteries
When the power lamp does not light, replace the battery with new one by following instructions.
1.Loosen the screw and remove the cover using the screwdriver (included with the television).
2.Replace the batteries, and then replace the cover.
Always tighten the screw to hold the battery case cover in place.
NOTE:
Use the specified type of battery
CR2032).
Do not insert the battery with the polarity (plus |
| and minus |
| ) |
|
| |||
backwards. |
|
|
|
|
Dispose of the old batteries as
9