Recording Function, Timer Recording | Sylvania C6260VD manual

PROGRAM NUMBER 4

ONCE DAILY WEEKLY

Index Search

An index mark will be assigned at the beginning of each record- ings you make. You may skip to a specific marked point by fol- lowing the steps below.

1	Press [SEARCH-MODE]so that the Index Search menu
	appears.
2	Enter the number of recordings you	INDEX SEARCH
	wish to skip by pressing [PLAY] or	03

	[STOP] within 30 seconds.
3	Press [F.FWD] or [REW] to start index search. If you
	want to go in the forward direction, press [F.FWD]. If you

want to go in the reverse direction, press [REW].

•After index search, the VCR will play the tape automati- cally.

Time Search

This feature allows you to go to a specific point on a tape by entering the exact amount of time you wish to skip in order to reach the point.

1	Press [SEARCH-MODE]so that the Time Search menu
	appears.	2 : 50
		TIME SEARCH
2	Enter your desired time to skip by
	pressing [PLAY] or [STOP] within 30 seconds.

3	Press [F.FWD] or [REW] to start time search. If you want
	to go in the forward direction, press [F.FWD]. If you want

to go in the reverse direction, press [REW].

•After time search, the VCR will play the tape automati- cally.

RECORDING FUNCTION

It may be unlawful to record play back copyrighted material with- out the consent of the copyright owner.

	Accidental erasure prevention
	To prevent accidental recording on a recorded
	cassette, remove its record safety tab. To
	record on it later, cover the hole with cello-	Record safety tab
	phane tape.	Record safety tab
	phane tape.

Before recording, make sure:

•The desired channel is selected by pressing [Number] on

the remote control or the [CHANNEL () ]. (If you con- nected the VCR to a cable box or satellite box as in "VCR to TV Connection" on page 3, select the VCR to channel

3 or 4 the same channel as the RF output channel of the VCR. Then, select the channel you want to record at the cable box or satellite box. In this case, you can ONLY record and view the SAME channel. )

•There is a tape with its safety tab into the VCR.

•The desired recording speed is selected in SP(standard play) or SLP(super long play) mode by pressing [SPEED] on the remote control.

Tape Speed		Recording/Playback Time
Type of tape	T60		T120	T160
SP mode	1hour		2hours	2-2/3hours
SLP mode	3hour		6hour	8hour

•TV STEREO or SAP is selected.

Viewing and Recording the Same Program

1 Begin the recording by pressing [RECORD].

•To temporarily stop recording or resume it, press [PAUSE/STILL]. After the VCR has been in Pause mode for 5 minutes, it will stop automatically to protect the tape and the video head from damage.

2 Press [STOP] when recording is completed.

OTR (One Touch Recording)

This feature allows you to set the recording length simply by pressing [REC/OTR] on the VCR.

1 Begin OTR by pressing [REC/OTR] on the VCR repeat- edly until the desired recording length appears.

REC	OTR(0:30)	OTR(1:00)
(Normal recording)
OTR(8:00)		OTR(7:30)

TIMER RECORDING

You may set the VCR to start recording while you are away. You can set eight programs to record on specific days, daily or week- ly within a 1 year period.

1		Insert a tape with its safety tab into the VCR.
	2	Select main menu by pressing [MENU].
3		Select "TIMER PROGRAMMING" by pressing [PLAY] or
3		[STOP]. Then, press [F.FWD].

•If you have not yet set the clock, "CLOCK SET" appears. If so, continue with the step [3] in "CLOCK SET UP" section. Then, set the timer recording.

4 Set the timer.

Set the program number (1~8)	PROGRAM NUMBER		4
Program number which is not set up flashes.	DATE	- - / - -
Program number which is not set up flashes.	START TIME - - : - -		- -
Press [PLAY] or [STOP] repeatedly for the	END TIME - - : - -		- -
Press [PLAY] or [STOP] repeatedly for the	CHANNEL	- -
desired program number.Then, press [F.FWD].	REC SPEED	- -
desired program number.Then, press [F.FWD].

Select once, daily or weekly recording

For once: Press [PLAY] or [STOP] to point to "ONCE".

For daily (Monday~Friday): Press [PLAY] or

[STOP] to point to "DAILY".

For weekly: Press [PLAY] or [STOP] to point to "WEEKLY".

Then, press [F.FWD].

Set the date

First, press [PLAY] or [STOP] for the month. Then, press [F.FWD]. Next, press [PLAY] or [STOP] for the day. Then, press [F.FWD].

Set the start time

First, press [PLAY] or [STOP] for the hour. Then, press [F.FWD]. Next, press [PLAY] or [STOP] for the minute. Then, press [F.FWD]. And then, press [PLAY] or [STOP] for AM or PM. Then, press [F.FWD].

Set the end time

Follow the instructions of "Set the start time" to set the end time.

Set the channel number

Press [PLAY] or [STOP] repeatedly for the desired channel number. Then, press [F.FWD].

If you connected the VCR to a cable box or satellite box as in "Connect VCR to TV" on page 3, select the VCR to channel 3 or 4 the same channel as RF output channel of the VCR.

Then, select the channel you want to record at the cable box or satellite box. Leave the cable box or satellite box on for timer recording.

Set the tape speed	ONE TIME PROGRAM
Set the tape speed	PROGRAM NUMBER 4
Press [PLAY] or [STOP] repeatedly for the	PROGRAM NUMBER 4
	DATE	05/12 MON
	START TIME 07:30		PM
desired tape speed.	END TIME 08:30		PM
desired tape speed.	CHANNEL	16
Then, press [F.FWD].	REC SPEED SP
Then, press [F.FWD].		SP
		SLP

•To go back one step, press [REW].

5	To set another program, repeat step [4]. To exit, press
	[C.RESET/EXIT].
6	Press [POWER] to set the timer. The TIMER indicator on
	the VCR comes on. TIMER RECORDING WILL NOT BE

ACTIVATED UNLESS YOU TURN THE VCR OFF.

– 5 –

C6260VD specifications

The Sylvania C6260VD is a versatile and user-friendly compact multimedia player that combines various features to enhance your entertainment experience. It is designed to cater to a wide range of media formats, making it an ideal device for those who appreciate versatility in their media consumption.

One of the standout features of the C6260VD is its DVD playback capability. This allows users to enjoy their favorite movies and shows in crisp, clear quality. The player supports a variety of disc formats, including DVD-R/RW and CD-R/RW, ensuring compatibility with most media. Additionally, the device’s built-in digital tuner makes it easy to access over-the-air television channels, providing a cost-effective alternative to cable or satellite subscriptions.

The C6260VD also excels in its multimedia playback capabilities. It includes USB and SD card slots, enabling users to enjoy music, photos, and videos stored on external devices. This feature makes it simple to share content with family and friends, turning any gathering into an instant multimedia experience. The device supports multiple file formats, ensuring that users can play a wide selection of content without compatibility issues.

Ease of use is another key characteristic of the Sylvania C6260VD. The user-friendly remote control and on-screen interface make navigating through media options straightforward, even for those who may not be tech-savvy. The compact design of the player allows for easy placement in various settings, whether it’s a living room, bedroom, or even a small apartment.

Audio quality is also a highlight, with the Sylvania C6260VD providing clear sound through its built-in speakers, along with support for external audio systems. Users can connect the player to their home theatre system to enhance the audio experience while watching movies or listening to music.

Overall, the Sylvania C6260VD is an excellent choice for anyone looking for a compact, feature-rich multimedia player. With its diverse playback options, user-friendly design, and good audio quality, it caters to a wide audience, appealing to movie lovers, music aficionados, and casual users alike. Its combination of practicality and versatility makes it a valuable addition to any entertainment setup.

Index Search

Enter the number of recordings you

Time Search

Enter your desired time to skip by

pressing [PLAY] or [STOP] within 30 seconds.