Sylvania C6260VD owner manual Playback Function

To Add/Delete Channels

When the VCR automatically program the tuner to scan only the channels you receive in your area, some channels may be skipped due to weak signal. You can manually add the channel in the VCR memory.

1		Press [MENU] until the main menu	- MENU -
		appears.	TIMER PROGRAMMING
			AUTO REPEAT	[OFF]
			CLOCK SET
			CHANNEL SET UP
2		Select "CHANNEL SET UP" by	LANGUAGE SELECT
			TV STEREO	[ON]
			AUDIO OUT
		pressing [PLAY] or [STOP]. Then,	SAP
		press [F.FWD].
3		Select "MANUAL SET UP" by pressing [PLAY] or
		[STOP]. Then, press [F.FWD].
4		Enter the desired channel number by pressing [PLAY]
		or [STOP].
5		Add or Delete it from memory by pressing [F.FWD] or
		[REW] so that "ADD" or "DELETE" flashes on the TV
		screen accordingly.
	6	Exit the Preset mode by pressing [C.RESET/EXIT].
		To Change the On-Screen Language
1	Press [MENU] until the main menu appears.
2		Select "LANGUAGE SELECT" by pressing [PLAY] or
		[STOP]. Then, press [F.FWD].
3		Select "ENGLISH" , "FRANCAIS" or "ESPAÑOL" by
		pressing [PLAY] or [STOP]. Then, press

[C.RESET/EXIT].

•If you accidentally select Spanish or French and need English: Press [MENU] and choose SELEC. IDIOMA, or SELECTION LANGUE. Press [F.FWD], and select ENG- LISH. Finally, press [C.RESET/EXIT].

Clock Set Up

1		Select main menu by pressing [MENU].(If the clock is not
		set, the CLOCK SET menu appears first. In this case, fol-
		low step [3].)
2		Select "CLOCK SET" by pressing [PLAY] or [STOP].
		Then, press [F.FWD].
	3	Set the clock.

Set the month	Press [PLAY] or [STOP] repeatedly.
	Then, press [F.FWD].
Set the day	Press [PLAY] or [STOP]repeatedly.
	Then, press [F.FWD].
Set the year	Press [PLAY] or [STOP] repeatedly.
	Then, press [F.FWD].
	The day of the week will appear automatically.

PLAYBACK FUNCTION

Normal Playback

1	Insert the prerecorded tape. The VCR will
	turn on. If the safety tab has been removed,
2	the VCR will start playback automatically.
	Turn on the TV and set the TV to channel 3. If channel
	3 is already occupied for broadcasting, change the RF out-

put to CH 4, and change the TV channel to CH4. (See “RF Output Channel” on page 3 for the detail.)

3 Begin playback by pressing [PLAY].

•Tracking adjustment will be set automatically (Digital Tracking function) when you start playback. To adjust the

tracking manually, press [CHANNEL () ] on the VCR.

•You cannot manually adjust the tracking of a Still picture.

However, you may press [CHANNEL () ] on the VCR to remove vertical jitter in a Still picture.

•When a tape has reached the end, the VCR will rewind the tape to the beginning, eject the tape, and turn off the VCR automatically.

4 To stop playback, press [STOP].

Counter Reset

•You can reset the counter by pressing [C.RESET/EXIT] on the remote control

Still / Slow

You can freeze the picture on TV screen by pressing [PAUSE/STILL] during playback.

•You can advance the picture by one frame at a time by press- ing [PAUSE/STILL] during the still mode.

•If the picture begins to vibrate vertically during the still mode,

stabilize the picture by pressing [CHANNEL () ].

•If the picture is distorted or rolling vertically, adjust the vertical hold control on your TV, if equipped.

You can see the slow motion by pressing [SLOW] during play- back or the still mode.

•If the noise bar appears on the TV screen, you can reduce it

by pressing [CHANNEL () ].

•After the VCR has been in Still/Slow mode for 5 minutes, it will stop automatically to protect the tape and the video head from damage.

•To return playback, press [PLAY].

Auto Repeat Playback

This feature allows you to play a tape over and over.

1	Select main menu by pressing [MENU].
2	Select "AUTO REPEAT" by pressing [PLAY] or [STOP].

			Press [PLAY] or [STOP] repeatedly.								Begin auto repeat playback by pressing [F.FWD] so that
	Set the hour
									3 [ON] appears next to "AUTO REPEAT".
			Then, press [F.FWD].
			Press [PLAY] or [STOP] repeatedly.								• If the on-screen menu still remains, press [C.RESET/EXIT]
	Set the minute
											to exit the menu.
			Then, press [F.FWD].
			Press [PLAY] or [STOP]								• To cancel the Auto repeat mode, press [F.FWD] at step [3]
	Set the AM
					CLOCK SET						so that [OFF] appears next to "AUTO REPEAT".
	or PM		repeatedly.
				MONTH		DAY	YEAR
											Search Functions
			03		/ 17 MON		2003
				HOUR		MINUTE	AM/PM
			05		:	40	PM AM				Picture Search
							PM
• To go back one step, press [REW].									If you want to skip or repeat a scene during playback, press
									[F.FWD] or [REW].
4		Start the clock by pressing [C.RESET/EXIT] or [F.FWD].
										• Press it again and the VCR will now search in super high
											speed. (in the LP/SLP modes only)
								– 4 –			EN