Menu selection
Basic screen 1
[2] | [#] |
|
|
Basic screen 2
[1]
Menu selection screen
(An item can be selected using the [1 ] and [! ] keys.)
CLIP | LOG | SETUP |
|
|
|
MENU1
VER | HDD | END |
|
|
|
MENU2
Basic screens 1 and 2
Basic screens 1 and 2 show the information required for normal operations. They appear on the display panel after the unit has been started up.
The menu selection screen is selected by pressing the [1] (right) key. Select a menu using the [!](left), [1](right), [2](down) and [#](up) keys, and press the SET key to estab- lish the menu.
12
0 5 1 4 1 5 0 1 0 0 : 0 0 : 0 0 : 0 0
720/60P | 2 | PLAY | AUTO | 1 |
|
|
|
|
|
3 | 4 | 5 | 6 | 7 |
1CLIP ID display
The name of the clip currently being output appears here.
2Time code display
The current time code value appears here.
During recording, the value of original time code which has been input is displayed; during playback, the value corresponding to the TC REGEN setting on the setup menu is output.
CONV: The time code that results when the head of the selected clip is converted as a time code of 00:00:00:00.
ORG: The time code during recording for each selected clip
TC REGEN settings
Output location | TC REGEN | ||
|
| ||
CONV | ORG | ||
| |||
|
|
| |
Display panel | CONV | ORG | |
|
|
| |
CONV | ORG | ||
|
|
| |
SD OUT connector | CONV | CONV | |
|
|
| |
HD SDI OUT connector | CONV | CONV | |
|
|
| |
3Output format/remaining hard disk drive memory dis- play
The output format of the currently selected clip appears here. For details on the formats which can be output, refer to page 17.
The remaining memory appears when basic screen 2 is displayed.
The remaining memory is displayed as the 24P or 60P equivalent.
Use the [\/] and [/\] keys to switch between 24P and 60P.
4Output format warning display
An asterisk (2) appears here (when LOCK has been selected as the INCOME LOCK setting in the
5Mode display
The current control mode (STOP, FF, REW, PLAY or REC) appears here.
6Auto Rec mode display
“AUTO” appears when AUTO REC is ON; no display appears when AUTO REC is OFF.
7Menu key display
The [>] (right) key is displayed here.
The [<] (left) or [>] (right) key is pressed to switch the menu screen which is to appear on the display panel.
10 (E)