Menu selection
HDD screen
On this screen, some data is saved into a part of the hard disk drive’s memory that is free and then loaded to check that the drive is working properly.
H D D V e r i f y S TA R T O K ?
1 Y E S N O
<Note>
When no clips have been recorded, it takes about 80 min- utes to check that the hard disk drive is working properly.
END screen
All the unit’s operations are shut down on this screen.
1.In the MENU mode, press the [1](right) key to move the cursor to END (shutdown).
2.Press the SET key.
3.The following message now appears. Select YES.
<Note>
Keep pressing both the SHIFT key and the [2] (down) key for more than 2 seconds and a shutdown confirma- tion message will appear on END screen of this unit.
[ E N D ]
1 Y E S N O
4.Press the SET key.
5.The following message now appears.
[ E N D ] | 3 9 |
Wait a moment |
|
6.Upon completion of shutdown, the following message appears.
P l e a s e t u r n o f f
P o w e r s w i t c h !
7.Set the power switch to OFF.
12 (E)