CONNECTIONS
Connection B | TV |
|
Very Good Picture and Sound Quality
To use this connection you must have:
• TV with separate RF and audio/video inputs (jacks)DSS
RECEIVER
•VCR with RF and audio/video inputs
•Coaxial and audio/video cables
To connect TV, VCR and antenna or cable box.
1. | Connect coaxial cables as shown. | VCR |
2. | Connect audio/video cables as shown. |
|
IN
VIDEO R AUDIO L
SATELLITE
DISH
OUT TO TV |
|
|
|
|
| VIDEO | R | L |
|
|
| AUDIO |
|
|
IN FROM ANT CH4 | VIDEO | R | SATELLITE IN | CABLE |
CH3 | L | OR | ||
|
| AUDIO |
| |
|
|
|
|
IN FROM ANT VIDEO IN AUDIO IN | |
CH3 |
|
CH4 |
|
R | L |
OUT TO TV
VIDEO OUT AUDIO OUT
To receive DSS® programming:
1.Tune TV to receive line output from satellite receiver (often called Input 1).
2.Tune satellite receiver to desired channel.
To receive
1.Turn off VCR and satellite receiver.
2.Tune TV to desired channel.
To receive off-air programming (with cable box):
1.Turn off VCR and satellite receiver.
2.Tune TV to cable box output channel (usually CH2, CH3, or CH4).
3.Tune cable box to desired channel.
To record DSS® programming:
1.Tune TV to record line output from satellite receiver (Input1).
2.Tune satellite receiver to desired channel.
3.Set your VCR to record on line input.
To view VCR programming:
1. Tune TV to VCR output channel (usually CH3 or CH4).
CAUTION
Do not stack electronic components or other objects on top of the DSS Receiver. The slots on top of the receiver must be left uncovered to allow proper airflow to the unit. Blocking the airflow to the unit could impair performance or damage your receiver and other components.
Do not stack the DSS receiver on top of a “hot component” such as an audio power amplifier.
37