CONNECTIONS
Connection D | TV |
|
Good Picture and Sound Quality)
To use this connection you must have:
• | TV with RF input | DSS |
|
| RECEIVER |
• | Coaxial cables |
|
To connect TV and antenna or cable box:
1. Connect coaxial cables as shown.
To receive DSS® programming:
•Tune TV to channel 3 or 4 (depending on how you set the CH3/CH4 switch on the back of the receiver.
IN
|
|
| SATELLITE |
|
|
| DISH |
|
|
| CABLE |
|
|
| OR |
OUT TO TV |
|
| |
| VIDEO | R | L |
|
|
| AUDIO |
IN FROM ANT |
|
| SATELLITE IN |
CH4 | VIDEO | R | |
CH3 | L | ||
|
|
| AUDIO |
To receive
1.Turn off satellite receiver.
2.Tune TV to desired channel.
To receive cable programming (with cable box):
1.Turn off satellite receiver.
2.TuneTV to cable box output channel (usually CH2, CH3, or CH4).
3.Tune cable box to desired channel.
CAUTION
Do not stack electronic components or other objects on top of the DSS Receiver. The slots on top of the receiver must be left uncovered to allow proper airflow to the unit. Blocking the airflow to the unit could impair performance or damage your receiver and other components.
Do not stack the DSS receiver on top of a “hot component” such as an audio power amplifier.
39