Panasonic TU-PTA100E manual Sound Menu, Volume, Bass Treble Balance, Mode

SOUND MENU

Open the Sound menu

Move to your choice

Increase or decrease levels or set options

Press the TV/AV button to exit the

Sound menu

Volume	The Volume adjustment sets the
	overall output volume.
	Note:
	At the time of shipment from the factory,
	the volume is set to the maximum level.
	The Wide Plasma Display also has a
	volume setting control, so the maximum
	volume is determined by the volume
	control settings at both the receiver and
	the Wide Plasma Display.

		Select
		Adjust
Sound menu	TV/AV	Exit
Volume
Bass
Treble
Balance
Headphone volume
AI	On
MPX	Stereo
Mode	Music

			Select
			Change
		TV/AV	Exit
	Sound menu
Volume

Bass

Treble

Balance

AI

MPX

Mode

Bass adjustment will emphasise the lower, deeper frequencies and can be increased or decreased.

Treble adjustment will emphasise the sharper, higher frequencies and can be increased or decreased.

Balance affects the levels of sound between the left and right speakers. Adjustment can be made so that the level from the speakers will suit your listening position.

The headphone volume can be adjusted independently of the receiver’s AUDIO OUT terminals so that everyone can enjoy listening at their own comfort level.

The Al setting automatically analyses the incoming sound signal and processes it to give lower noise and optimum tone for the programme material.

MPX will usually be set to Stereo to provide the best reproduction, however if reception deteriorates or if the service is not available than it is advisable to switch to Mono. Mono (M1) and (M2) can also be selected if signals are being transmitted.

Bass and Treble are set to the optimum levels for music or speech.

Bass
Treble
Balance
Headphone volume
AI	On
MPX	Stereo
Mode	Music

		Select
		Change
Sound menu	TV/AV	Exit
Volume
Bass
Treble
Balance
Headphone volume
AI	Off
MPX	Stereo
Mode	Music

13