Panasonic ET60M First time Auto Tuning, Plug the TV into mains socket and turn power on

Page 13

d

s

]

First time Auto Tuning

Automatically sets up the TV and searches for available TV channels when the TV is turned on for the first time.

●These steps are not necessary if the setup has been completed by your local dealer.

●Please complete connections (p. 7 - 10) and settings (if necessary) of the connected equipment before starting Auto Tuning. For details of settings for the connected equipment, read the manual of the equipment.

1 Plug the TV into mains socket and turn power on

●Takes a few seconds to be displayed.

2 Select the following items

Set up each item by following the on-screen instructions.

Select your language

Select [Home]

Select [Home] viewing environment to use in your home environment.

●[Shop] is for shop display.

●To change viewing environment later on, you will need to initialise all settings by accessing Shipping Condition.

Set up the network connection Select your country

Select your area

●When selecting [CATV/Other], press the OK button, and then select the Channel Plan from Indian CATV, South Africa, American System, American CATV or Japan CATV.

3

Select the type of [Home Screen]

 

The demonstration to explain how to use [my Home Screen] is displayed. Confirm the demonstration by

 

following the on-screen instructions, and then select the desired [Home Screen].

 

Example: [Home Screen Selection]

Example: [TV Home Screen]

●[my Home Screen] is the start-up screen when the TV is turned on or the HOME button is pressed.

Auto Tuning is now complete and your TV is ready for viewing.

If tuning has failed, check the connection of the network, RF cable, and then follow the on-screen instructions.

Note

●The TV will automatically go into Standby mode when no operation is performed for 4 hours if [Auto Standby] in the Timer Menu is set to [On].

●The TV will automatically go into Standby mode when no signal is received and no operation is performed for 10 minutes if [No signal Power off] in the Timer Menu is set to [On].

●To retune all channels [Auto Tuning] in [Tuning Menu] (Setup Menu)

●To initialise all settings [Shipping Condition] in [System Menu] (Setup Menu)

13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Contents Important Notice Mains plug and lead Safety PrecautionsTake care PedestalWhen not in use for a long time Built-in wireless LANBattery for the Remote Control Radio wave3D Eyewear Use AccessoriesViewing 3D Images Silver M5 × Assembly screw Base Black M4 × Assembly screw BracketAssembling / Removing the pedestal Removing the pedestal from the TVTerminals ConnectionsBasic connections Mains leadWireless connection Wired connectionDVD Recorder / VCR Set top boxDVD player Component equipment Other connectionsCamcorder / Game equipment Video equipment Features Using the cable tie suppliedTypes of connectable equipment to each terminal Terminal Attach the cable tie Bundle the cablesInstalling / Removing batteries Remote ControlIdentifying Controls Using the On Screen Displays Operation guide Indicator / Control panelHow to use remote control Operation guidePlug the TV into mains socket and turn power on First time Auto TuningSelect the following items Select the type of Home ScreenSelect TV mode Select a channel Turn power onAccess Apps list and select a feature OperationsDisplay eHELP How to Use eHELPSelect the category and item Help EHELPPut the 3D Eyewear on View the 3D images Viewing 3D imagesTo view the 3D images 2D images converted to 3DMaintenance FAQsDisplay panel, Cabinet, Pedestal Mains plugSpecifications 3D Eyewear When using the wall-hanging bracketModel Number Serial Number Nigeria
Top Page Image Contents