Connections
●External equipment and cables shown are not supplied with this TV.
●Ensure that the unit is disconnected from the mains socket before attaching or disconnecting any leads.
●Check the type of terminals and cable plugs are correct when connecting.
●Always use a fully wired HDMI cable.
●Keep the TV away from electronic equipment (video equipment, etc.) or equipment with an infrared sensor. Otherwise, distortion of image / sound may occur or operation of other equipment may be interfered.
●Also read the manual of the equipment being connected.
Terminals
|
| 1 | SD Card slot | |
|
| 2 | USB 1 - 2 port | |
1 | 2 | 3 | HDMI1 - 3 | |
4 | DIGITAL AUDIO OUT | |||
|
| |||
|
| 5 | AV (COMPONENT / VIDEO) | |
|
| 6 | (p. 9) | |
|
| Aerial terminal | ||
|
| 7 | (see below) | |
|
| ETHERNET (p. 8) |
3
4
7 | 6 | 5 |
Basic connections
Mains lead and aerial
■ TV | Aerial |
Mains lead (supplied)
AC
RF cable
■Mains lead
Insert the mains plug firmly into place.
●When disconnecting the mains lead, be absolutely sure to disconnect the mains plug at the socket outlet first.
●Keep RF (aerial) cable away from the mains lead to avoid and minimise mains interference pickup. ●Do not place the RF cable under the TV.
●An aerial, correct cable (75 Ω coaxial) and correct terminating plug are required to obtain optimum quality picture and sound.
●If a communal aerial system is used, you may require the correct connection cable and plug between the wall aerial socket and the TV.
●Your local Television Service Centre or dealer may be able to assist you in obtaining the correct aerial system for your particular area and the accessories required.
●Any matters regarding aerial installation, upgrading of existing systems or accessories required, and the costs incurred, are the responsibility of you, the customer.
7